VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: tdotdub on April 16, 2010, 04:30:53 pm

Title: GT22V And an 5cyl audi diesel -help needed!
Post by: tdotdub on April 16, 2010, 04:30:53 pm

Hi guys.... So first off all.. This is the first time I'm on this site.. And my first time posting :)

I have an 5cyl Audi diesel engine from an 1985 Audi 5000 diesel :) And I know many people in the past ran an gt22v turbo on it from the VW T4 TDI eurovan (euro-spec).. So I had to get my hands on one of those turbo's... And I need to figure out how to run/get an VNT controller for it. I will also run it at 25 PSI off boost. Burn_ur_money, said I should look into eurovan VNT controllers.. But I'm lost so I'm posting here and looking for help  ;D

Thanks in advance for all help

Title: Re: GT22V And an 5cyl audi diesel -help needed!
Post by: tdotdub on April 23, 2010, 08:18:15 pm

.....

Title: Re: GT22V And an 5cyl audi diesel -help needed!
Post by: rabbid79 on April 23, 2010, 08:59:09 pm

Quote

Burn_ur_money, said I should look into eurovan VNT controllers..

I'm sure the VNT controller for the T4 is integrated into the TDI ECU.  You need to run a stand-alone controller which, like Andrew said, is pretty much going to be a purely mechanical implementation at this point.  If you have any 5-cylinder diesel specific questions, I'd be happy to help.