VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: GTD. on November 20, 2005, 01:48:54 pm

Title: Using K-Jet injector fuel lines to fit MBC?
Post by: GTD. on November 20, 2005, 01:48:54 pm

Just had a thought, I'm thinking of using a pair of Bosch K-Jet fuel lines to install a manual boost controller (granger/armval type) anyone know if the banjo fittings used on the k-jet metering head are the same size as the banjos on the compressor housing/wastegate used on a KKK turbo with a metal pipe connecting the compressor housing to the wastegate

K-Jet fuel lines as shown in the bottom left hand corner of this picture

(http://img.2dehands.nl/f/normal/10339495.jpg)

Title: Using K-Jet injector fuel lines to fit MBC?
Post by: therabbittree on November 20, 2005, 03:28:24 pm

yes i think they are..i thought about that i have a really PILEin my shed at my parents house.. i think it would fit the pump aneroid also... problem is the length..you may have to play around and find the right length and bends etc..i will lok and see soon myself..mummn
later
Deo
\x/ hillfolk!