VWDiesel.net The IDI, TDI, and mTDI source.
For Sale/Looking For => Parts for Sale/Wanted => Topic started by: sdwarf36 on March 14, 2010, 03:58:42 pm
-
I'm putting a '84 CY motor into my 91 Jetta. The IP bracket on the CY motor has a engine mount on it--the car doesn't. I'd like to keep the outgoing motor complete (and get the ingoing motor as close as I can to ready to install. )
Anyone have one?
-
if you're talking about the mk1 motor mount, just cut it off like I did.
(http://img9.imageshack.us/img9/4608/img5153v.jpg)
;D
and this was going into a mk2. just cut it off, you'll be fine.
-
And, If you don't want to cut I'll trade you brackets.... I think I have the proper MK2 timing covers too....
-
And, If you don't want to cut I'll trade you brackets.... I think I have the proper MK2 timing covers too....
Okie dokie-sounds good to me-You tell me what i need-I'll send you the coresponding mk1 stuff-Tell me what I own you( don't forget to to deduct for the hubcap clips! ;) )
-
I'm putting an '85 ME in my '81 Rabbit so I got all kinds of stuff laying around here.. They only thing I don't have laying free is an MK1 IP bracket.. The one's I have are still on engines, in cars..
I found the bracket, and timing covers.. The plastic covers I have are not spectacular, the upper cover has a piece broken out of it.... Here's some pics..
http://s295.photobucket.com/albums/mm124/maxfax3/VW/ip%20timing/ (http://s295.photobucket.com/albums/mm124/maxfax3/VW/ip%20timing/)
-
Looks good enuff for me. The cover wont slow the build up. I dont think i still have you address -email it to me [email protected]
The metal outer cover I have isn't mint either-had a dent in it from an accident.
LMK what you want to do.