VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => TDI Engine -General Info => Topic started by: snakemaster on February 23, 2010, 02:23:03 pm
-
years a go i got a seat toleda 1.9 tdi 96 with AC , so a week a go i got a nother gas seat 1.6 with AC to and i have put the 1.9 Mtdi from my other golf in her but not shure the belt set up as the engine i just put in had no PS or AC but have added the brackets , so dose the 1z tdi PS belt also run the water pump on a V belt , and the other belt runs round the crank , altenter, AC , tencher , if so i am missing a pully :'( or dose it run a difrant way
-
the PAS has a separate V Belt on the side of the serp pulley. the serp belt tuns the alternator, waterpump and AC (if you have it) i can get a pic if you need one.
Ryan
-
the PAS has a separate V Belt on the side of the serp pulley. the serp belt tuns the alternator, waterpump and AC (if you have it) i can get a pic if you need one.
Ryan
a pic would be great ryan , as i have tryed to get a belt for the AC ,altnater bottom pully etc and thay seem to be to short , and the PS one seems to be to long , i maby got the wrong pully on the water pump , the pully i have on the water pump is the same as the on with out AC ,
would the water pump still work ok turning Anty clockwise ?