VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: ObscuredByClouds on January 31, 2010, 05:00:43 pm

Title: SOLDSOLDSOLD
Post by: ObscuredByClouds on January 31, 2010, 05:00:43 pm

SOLDSOLD

Title: Re: 1.6 N/A cylinder heads
Post by: truckinwagen on February 01, 2010, 02:19:26 pm

11 or 12mm headbolts?

Title: Re: 1.6 N/A cylinder heads
Post by: truckinwagen on February 01, 2010, 09:51:38 pm

mech heads can be 11 or 12mm

the lack of the extra oil drain makes it a mech head, but doesn't tell you if it is an 11 or 12mm head.

pics would clear it up though

-Owen

Title: Re: 1.6 N/A cylinder heads
Post by: hustonr123 on February 10, 2010, 04:23:00 pm

how much shipped to 17233    Im in pa  the snow has been horrible here also almost 4 ft in a week

Title: Re: 1.6 mechanical cylinder heads (PICS ADDED)
Post by: dash cunning on March 02, 2010, 05:29:42 am

ever find out if they were 11 or 12mm heads? i need an 11mm one.

Title: Re: 1.6 mechanical cylinder heads (PICS ADDED)
Post by: Dallas on May 12, 2010, 07:33:28 pm

Do you still have one of the heads?  If so, I may be interested.

Title: Re: 1.6 mechanical cylinder heads (PICS ADDED)
Post by: Krazy on July 08, 2010, 08:18:22 am

stick a 12 mm bolt in a bolt hole.  If it fits, it is a 12 mm head.  If it doesn't, it is a 11 mm head.  I just removed a head bolt from a 12 mm block and one of the head bolts was threaded into one one hole in the head.  I hope this helps.

Title: Re: 1.6 mechanical cylinder heads (PICS ADDED)
Post by: pyro7890 on July 10, 2010, 03:41:03 pm

can you put some more pictures on