VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: fairweather on January 29, 2010, 09:53:22 am

Title: FS: Complete Garrett GT1544/AAZ manifold setup for 1Z/AHU Vanagon 50*
Post by: fairweather on January 29, 2010, 09:53:22 am

This is for installation of a 1Z or AHU TDI in a vanagon at 50 degrees. This setup flips the turbo up to allow for correct oil drainage and clearance for the stock DV engine bracket.


Includes:
GT1544 rebuilt/balanced by G-Pop Shop
CNC adapter plate
3 bolt AAZ manifold
oil drain/supply fittings (will need M18x1.5 to -AN10 plus section of hose for block connection or banjo fitting)
oil supply line
silicone reducer for compressor inlet
stock piping for compressor outlet
discharge flange with starter 2.5" pipe + gasket

650$

tom.verry at gmail dot com

(http://lh4.ggpht.com/_LEM-gl8Oq-s/S2McZWbn3pI/AAAAAAAAAes/zGxfNPJnl04/s640/DSC_0889.jpg)
(http://lh4.ggpht.com/_LEM-gl8Oq-s/S2McZ7MVGRI/AAAAAAAAAew/iVBzHZ2pcmk/DSC_0890.jpg)
(http://lh5.ggpht.com/_LEM-gl8Oq-s/S2Mca2NaeyI/AAAAAAAAAe8/dE50JLvd8fc/DSC_0893.jpg)
(http://lh6.ggpht.com/_LEM-gl8Oq-s/S2Mcbpbc3NI/AAAAAAAAAfA/iAw1iTpvBsE/DSC_0894.jpg)
(http://lh6.ggpht.com/_LEM-gl8Oq-s/S2Mcb8nn14I/AAAAAAAAAfE/5rTyimTog4Y/s640/DSC_0895.jpg)

Title: Re: FS: Complete Garrett GT1544/AAZ manifold setup for 1Z/AHU Vanagon 50*
Post by: fairweather on February 08, 2010, 06:27:01 am

bump

Title: Re: FS: Complete Garrett GT1544/AAZ manifold setup for 1Z/AHU Vanagon 50*
Post by: fairweather on June 03, 2011, 06:12:53 am

bump, new price

Title: Re: FS: Complete Garrett GT1544/AAZ manifold setup for 1Z/AHU Vanagon 50*
Post by: fairweather on November 03, 2011, 09:11:32 am

bump