VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: mr.mtdi on January 22, 2010, 09:24:07 am

Title: measurements/drawings of 1.6td /AAZ Manifold
Post by: mr.mtdi on January 22, 2010, 09:24:07 am

I need the measuremnets for the turbo flange and the angle between inlet and outlet of this manifold for drwinging an adapter for another turbo. important measurement of the outlet are: outlet bore diameter, offset between atachment threads and thread diameter.
regards
michael

(http://www.kfzdemontage.de/ebay/ben/24134-1.jpg)

Title: Re: measurements/drawings of 1.6td /AAZ Manifold
Post by: foxracer1 on January 23, 2010, 05:23:48 pm

Someone has a cad drawing of this said info. I don't have a mani laying around or i'd measure it for ya. Can't remember the thread that had the diagram and specs in it.

Title: Re: measurements/drawings of 1.6td /AAZ Manifold
Post by: theman53 on January 23, 2010, 06:14:44 pm

I am almost sure that the threads in the mani are 10mm-1.25 thread.

Title: Re: measurements/drawings of 1.6td /AAZ Manifold
Post by: truckinwagen on January 23, 2010, 06:50:25 pm

I have the CAD drawing of the trapezoidal flange if you want it, PM me your email and I will send it to you.

-Owen

Title: Re: measurements/drawings of 1.6td /AAZ Manifold
Post by: mr.mtdi on January 24, 2010, 08:04:53 am

Quote from: truckinwagen on January 23, 2010, 06:50:25 pm

I have the CAD drawing of the trapezoidal flange if you want it, PM me your email and I will send it to you.

-Owen

you have a PM
thx to everybody
michael