VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: ScottSummerhayes on January 07, 2010, 03:09:29 am

Title: Need a quick answer! ARP HeadStud Size...
Post by: ScottSummerhayes on January 07, 2010, 03:09:29 am

Hello Guys,

What size head studs would i need for a GTD engine (SB engine code, out of a 94 Passat) with IC.

I can get some 12mm for cheap, i hope this is correct :)

Title: Re: Need a quick answer! ARP HeadStud Size...
Post by: truckinwagen on January 07, 2010, 03:10:29 am

should be, only the 1.5 and early 1.6 were 11mm

Title: Re: Need a quick answer! ARP HeadStud Size...
Post by: ScottSummerhayes on January 07, 2010, 03:25:06 am

Thanks buddy!

A admin can now close this thread.