VWDiesel.net The IDI, TDI, and mTDI source.

General Information => Troubleshooting => Topic started by: vanagondiesel on October 19, 2005, 11:20:55 am

Title: Injection Pump: Non Turbo pump on a turbo head
Post by: vanagondiesel on October 19, 2005, 11:20:55 am

So what kind of tweeking do I need to do using a non turbo pump on a turbo head setup?

1.6 l 86 A-2 head on a 83 Pickup :roll:

Title: Injection Pump: Non Turbo pump on a turbo head
Post by: Maarten on October 19, 2005, 02:24:49 pm

AFAIK it fits.. but you'll lose the fuel enrichment under boost (LDA mushroom on top of the punp)

Title: Injection Pump: Non Turbo pump on a turbo head
Post by: vanagondiesel on October 19, 2005, 05:46:26 pm

I have a 90 hydrolic head complete A-2 motor I pulled (1.6 non turbo) from a junker a few months back...

That specific pump has that tower, and several ports, one which is on the tower.  I assume, THAT pump would work properly if connected to the vac port on the intake of the turbo head..,.

btw, I chickened out.... :oops: and pulled the turbo head, and put the standard solid lifter head back on today.

A new BOSCH pump is due in any day now.... :P

Title: Injection Pump: Non Turbo pump on a turbo head
Post by: vwmike on October 20, 2005, 01:21:52 am

I'm confused.

Title: Injection Pump: Non Turbo pump on a turbo head
Post by: vanagondiesel on October 20, 2005, 12:19:55 pm

I have a standard 1.6 non turbo, complete with the standard pump

I want to put a turbo head on it, complete setup, what kind of tweeks does the standard injection pump need to make it run

or do I need a newer style pump