VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Maarten on October 09, 2005, 05:24:10 am

Title: 1.9 Dynorun
Post by: Maarten on October 09, 2005, 05:24:10 am

http://morninglight.demon.nl/a3/dyno1.jpg

124.8PK / 244Nm (~180ft/lbs) 8)


some Quicktime vids (no sound :():

dyno1.mov (http://www.vending24.nl/oud/images/a3/dyno1.mov)
dyno2.mov (http://www.vending24.nl/oud/images/a3/dyno2.mov)
dyno3.mov (http://www.vending24.nl/oud/images/a3/dyno3.mov)

 :D

Engine specs:

1.9TD AAZ
KKK K24 (OEM 1.6TD) @1.15bar
Exhaust: 70mm dp, 60mm freeflow exhaust)
Mild governormod (stiffer springs, 1 washer)
Renault Master Van intercooler, 2.25" plumbing

Title: 1.9 Dynorun
Post by: malone on October 09, 2005, 10:33:52 am

Looks very healthy for only 1.15bar.  :)

How is the 'engine horsepower' calculated? Do you have wheel horsepower #s?

Title: 1.9 Dynorun
Post by: Maarten on October 09, 2005, 11:54:46 am

Wheelpower was 111.9HP /215Nm

The guy did 3 runs to get the losses and rpm right (got no revcounter yet). The bench should be ok because a few cars later was a dude who went on another bench a few weeks ago and he ran 7HP more that on the other bench (he changed his exhaust to large diameter freeflow)