VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: GEE-BEE on November 05, 2009, 06:14:19 pm

Title: TURBO TO MANIFOLD BOOT ( DUCT 1.6 & 1.9 ) TD Model's
Post by: GEE-BEE on November 05, 2009, 06:14:19 pm

Do they use the same boot on both motor's ?

Let me know ?

Gee-Bee

Title: Re: TURBO TO MANIFOLD BOOT ( DUCT 1.6 & 1.9 ) TD Model's
Post by: Andy@React on November 10, 2009, 09:11:08 am

it will depend on the turbo wont it? my GTD turbo (K14) flange is bigger than my AAZ turbo (K03) flange

Title: Re: TURBO TO MANIFOLD BOOT ( DUCT 1.6 & 1.9 ) TD Model's
Post by: GEE-BEE on November 10, 2009, 09:28:44 am

AAZ / KO3 1.50 I.D. TO 1.75 I.D.

I have found silicone 5ply 1.50 to 1.87 ( 90 degree )

stock production item at: THERMALFLEX.COM

PART # TFC590-150/187 COST DEALER 34.42

I STAY AWAY FROM THE CHEAP SILICONE PRODUCTS FROM SILICONEINTAKES.COM

I will advise fitment


Gee-Bee

Title: Re: TURBO TO MANIFOLD BOOT ( DUCT 1.6 & 1.9 ) TD Model's
Post by: macka on November 10, 2009, 09:42:28 am

what are we looking at for cost?

Title: Re: TURBO TO MANIFOLD BOOT ( DUCT 1.6 & 1.9 ) TD Model's
Post by: GEE-BEE on November 10, 2009, 09:52:25 am

I would  have to purchase five each, than outbound frht 10.50, the length is 6' inches on these so you can cut with a band saw for overall length you require

If you want a pdf catalog, email me at [email protected]

GEE-BEE