VWDiesel.net The IDI, TDI, and mTDI source.

General Information => Upgrades (non engine related ) => Topic started by: GEE-BEE on October 09, 2009, 04:32:28 pm

Title: MKI TO G60 BRAKES ( Calipers and rotor's )
Post by: GEE-BEE on October 09, 2009, 04:32:28 pm

I purchased the Ebrake cable and Caliper adapters to install a set of G60 calipers and rotors from a Corrado,
( GMAN ) [email protected]

I'am changing the brakes pedal assy from a MKII since I"am doing a new 25mm master cylinder and new Brake booster

I got everything I needed from a wreck 400.00  ( seats included )

I wanted new stuff like the master and booster thou...

Gee-Bee

Title: Re: MKI TO G60 BRAKES ( Calipers and rotor's )
Post by: Jettagli16v on October 18, 2009, 11:54:35 am

I dont entirely understand this post.
Are you putting the Corrade G60 front brakes on the back of a mk1?
And where's the question?

I am familiar with the G60 (Corrado, not to be confused with the Girling 60 calipers from an Audi)
brake upgrade for Mk2/Mk3 4 cylinder,
but have little experience doing the kit on a Mk1.

(The reason I was looking here, I just got a full set of brakes for my 85 TD:
Corrado G60 fronts, and Mk3 rear discs...)

-Brad

Title: Re: MKI TO G60 BRAKES ( Calipers and rotor's )
Post by: GEE-BEE on October 19, 2009, 08:43:29 pm

I was informing on how to install , I also had to do MKII pedal swapp since the different type of larger master cylinder

Gee-Bee