VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: sawedoffgolf on September 23, 2009, 02:04:45 am

Title: need some help finding this oil fitting
Post by: sawedoffgolf on September 23, 2009, 02:04:45 am

Alright, i might get some gasser hate for posting this but i cant seem to find this oil restrictor anywhere. basically i need a -4AN to M12x1.5,  its for a turbo g60 project of mine. I figured i should ask here since I am using a k24 turbo and the feed is M12x1.5 which is on our 1.6TD's diesels.

Title: Re: need some help finding this oil fitting
Post by: 410 on September 23, 2009, 11:12:54 am

I needed this exact adapter and I got it from my local napa store.  The parts guy found it under hydraulic adapters.  hope this helps.

Title: Re: need some help finding this oil fitting
Post by: rallydiesel on September 23, 2009, 11:52:40 am

Male/male? Here's one:

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-FTG-076&Category_Code=ATP-FTG2 (http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-FTG-076&Category_Code=ATP-FTG2)

Title: Re: need some help finding this oil fitting
Post by: sawedoffgolf on September 23, 2009, 11:54:58 pm

thanks for the help, i was originally looking at the atp site also and a few others, i saw those fittings. but basically i was looking for a oil RESTRICTOR that had those thread pitch just incase i need to run one on my gasser, but i am thinking it should be fine since the diesel doesnt seem to have a restrictor for the k24.