VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Mozza on September 19, 2009, 10:22:24 am

Title: Boost pin
Post by: Mozza on September 19, 2009, 10:22:24 am

I will be changing the boost pin in my aaz lump for this one
http://www.brickwerks.co.uk/index.php?page=shop.product_details&flypage=shop.flypage&product_id=490&category_id=94&manufacturer_id=0&option=com_virtuemart&Itemid=6

is there anything i need to be doing to get the best out of engine with this until i have the money for all the gauges to go boot mad

Title: Re: Boost pin
Post by: GEE-BEE on September 20, 2009, 07:40:31 am

2.5 DOWNPIPE AND EXHAUST, Nozzles

Best guages at Mcnally.com

I drilled and tapped before I sent them off for coating...

Intake a PD150 is next with a Watercooled intercooler is next for me..

Gee-Bee

Title: Re: Boost pin
Post by: dieselweasel on September 20, 2009, 10:54:47 am

Get an EGT gauge or go easy on the throttle until you do.  That pin is quite cable of allowing fuelling to reach excessive and engine melting levels.