VWDiesel.net The IDI, TDI, and mTDI source.
General Information => Troubleshooting => Topic started by: Peter on September 13, 2009, 05:26:01 pm
-
Where can one buy the gasket that fits between the block and the oil cooler...I have searched a few places with no luck
-
Dealer will have 'em, and the WorldPac (http://www.importcarpartscanada.ca/ShopByVehicle.epc?q=1994-Volkswagen-Jetta--Base--Sedan-Engine--Mechanical&yearid=1994%40%401994&makeid=74%40%40VOLKSWAGEN%40%40X&modelid=7389%3ABT|5%3AA|5%3AED|576%3AFT|6%3ASM|20%3AEB|1811%40%40Jetta+Base+Sedan&catid=240154%40%40Engine+Mechanical&subcatid=240418@@Oil+Cooler+Seal&mode=PA) guys carry them as well.
-
What is the diameter?
I see several sizes on ebay.
Volve oil cooler was the search I was using.
-
The oil filter flange is between the oil cooler and the block. Do you want the oil cooler o-ring or the filter flange gasket?
From what I remember an oil filter gasket is damn close in size and I was gonna use one there but the dealer had the O-ring and I got 2 of them, I didn't want that gasket to possibly blow out of there.
-
This?
http://www.autohausaz.com/search/product.aspx?sid=lafyt54532dax5451sxc5xnd&makeid=800026@VW&modelid=1285455@RABBIT%20L&year=1984&cid=20@Engine%20Parts,%20Seals%20%26%20Gaskets&gid=5432@Oil%20Filter%20Gasket
-
This?
http://www.autohausaz.com/search/product.aspx?sid=lafyt54532dax5451sxc5xnd&makeid=800026@VW&modelid=1285455@RABBIT%20L&year=1984&cid=20@Engine%20Parts,%20Seals%20%26%20Gaskets&gid=5432@Oil%20Filter%20Gasket
Thankyou.. this is the gasket I was looking for