VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: midwestfalia on September 12, 2009, 02:17:49 pm

Title: where to get gasket for aaz neck?
Post by: midwestfalia on September 12, 2009, 02:17:49 pm

Where can I order the gasket that goes in between the intake manifold and neck on an aaz manifold?

Thanks!

Title: Re: where to get gasket for aaz neck?
Post by: ilikevwdiesel on September 12, 2009, 02:21:37 pm

if you mean the inlet to the intake manifold most likely from VW. You could get the VW number at vagcat.com and search for it. Get some gasket material and make one.

Title: Re: where to get gasket for aaz neck?
Post by: midwestfalia on September 12, 2009, 02:50:34 pm

This manifold is from a canadian car.  Did the US eco diesels have the same type of manifold?  I have never seen an eco diesel in person to check.

Title: Re: where to get gasket for aaz neck?
Post by: ilikevwdiesel on September 12, 2009, 03:52:59 pm

http://www.worldimpex.com/parts/genuine-part-gasket_40937.html

Title: Re: where to get gasket for aaz neck?
Post by: midwestfalia on September 13, 2009, 05:43:00 am

Thank you ilikevwdiesel.  had a friend look on etka and thats it.  Thank You.

Title: Re: where to get gasket for aaz neck?
Post by: ilikevwdiesel on September 13, 2009, 06:11:32 am

I'd still take the neck, spray something on it then stick it on a piece of gasket material (twelve pack package?) and use that as a template to make your own. Much cheaper and faster.

Title: Re: where to get gasket for aaz neck?
Post by: GEE-BEE on October 11, 2009, 11:09:28 am

I MADE A DIE FOR THIS ALREADY.....

SILICONE SEAL WITH FIBERGLASS INSERT .062 THICK

LET ME KNOW I WILL MAIL YOU ONE

GEE-BEE

[email protected]