VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: citigolf on September 09, 2009, 11:19:56 am

Title: aaz in mk2 golf???
Post by: citigolf on September 09, 2009, 11:19:56 am

is it possible to dropp an aaz straght in and run my 1.6td manifolds and turbo???
i realise i will need to change all the mounts.....

but is there anything else?  will everything wire up the same? pump? ect?

cheers

Title: Re: aaz in mk2 golf???
Post by: boomenstein on September 09, 2009, 01:03:49 pm

I just did this swap this weekend.
See
http://www.vwdiesel.net/forum/index.php?topic=21122.0
Mine was a 1.6NA
The downpipe from the MK3 fits if you have that.
The only mount you will need to change is the rear passenger, the MK2 uses 3 bolts and the MK3 uses 1.
Just swap that mount off you 1.6 and your golden.