VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: skifree on August 22, 2009, 01:25:26 pm

Title: torque for turbo to manifold bolts?
Post by: skifree on August 22, 2009, 01:25:26 pm

Does anyone know what the torque is for the turbo to manifold bolts?

Title: Re: torque for turbo to manifold bolts?
Post by: jack's lack on August 22, 2009, 01:53:28 pm

On the AAZ Bentley says 45Nm (33ft-lb) and recommends the use of anti-seize compound
On the 1.6 Bentley says 40Nm (30 ft-lb) in stages

do you not own a Bentley manual? You should it will be the best $40 you will ever spend on your car

Title: Re: torque for turbo to manifold bolts?
Post by: Rabbit TD on August 22, 2009, 07:31:29 pm

Quote from: jack's lack on August 22, 2009, 01:53:28 pm

On the AAZ Bentley says 45Nm (33ft-lb) and recommends the use of anti-seize compound
On the 1.6 Bentley says 40Nm (30 ft-lb) in stages

do you not own a Bentley manual? You should it will be the best $40 you will ever spend on your car

Are they still just $40, I thouht they'd be twiice that by now but still worth every penny.  With a Bentley and this place you can acomplish anything  on these cars.  Without them you might as well just junk the damn things when they quit :D