VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: Dr. Diesel on September 15, 2005, 07:59:45 pm

Title: fs: raceware head studs
Post by: Dr. Diesel on September 15, 2005, 07:59:45 pm

Selling a set of raceware head studs to fit MF or AAZ engines. Less than a year old, approximately 9000km's, mostly under 10 psi boost. Upgrading to bigger studs, don't need these ones anymore.
$150 cdn /best offer.

Title: fs: raceware head studs
Post by: vwmike on September 16, 2005, 02:23:00 am

hmmmm....

Title: fs: raceware head studs
Post by: SMOKEYDUB on September 17, 2005, 08:34:48 pm

uhhh what about me! well have to talk.

Title: fs: raceware head studs
Post by: Dr. Diesel on September 18, 2005, 05:01:05 am

drop by anytime, smokey.  I think I saw you on Main St. East Friday night around 11 something.

Title: fs: raceware head studs
Post by: Hammy on September 19, 2005, 03:41:14 pm

Do you still have these Doc.?

Title: fs: raceware head studs
Post by: Dr. Diesel on September 19, 2005, 05:50:24 pm

yes, still have 'em!

Title: fs: raceware head studs
Post by: fuslit on September 25, 2005, 08:31:52 pm

hi,
I'm in the process of rebuilding a 1.6l td motor,  will these fit the engine? (what are the lengths of them, 11mm or 12 mm?) At the moment, I'm not sure which engine blocks I have (I'll have to check) If they are MF (I'm pretty sure they are) I could do $90 us (105 cdn?) http://www.x-rates.com/calculator.html funds (sorry if thats a lowball offer...)

Also, are these the studs in this thread http://vwdiesel.net/phpBB/viewtopic.php?t=344&highlight=raceware?
Did you figure out what the torque specs on should be? Do you have instructions for re-install used head studs, Would they include the nuts for them as well.

sorry for the questions... I'll be asking more as this will be my first rebuild... and I'm just getting new parts together.

Thanks in advance

-Todd

Title: fs: raceware head studs
Post by: Dr. Diesel on September 28, 2005, 12:56:01 am

Hi,
they will fit MF and AAZ engines. The overtorqued studs have been doing time satisfactorily in a n/a diesel golf with no signs of leakage. The studs for sale were the replacements for those studs. Off the top of my head, the torque specs are 20, 40 and 50 ft. lbs, using conventional 20W50 engine oil.
That price is a little low.

Title: fs: raceware head studs
Post by: DVST8R on October 05, 2005, 08:53:24 am

You have a PM.

Title: fs: raceware head studs
Post by: Dr. Diesel on October 06, 2005, 10:26:51 pm

sold

Title: Raceware Studs
Post by: bildon on November 03, 2005, 05:28:39 pm

I have RW diesel studs available if anyone still needs them.  Best prices too. Reply here, IM me here or send an email to bill at bildon.com

Thanks,
Bill