VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: dillenger1 on April 05, 2009, 06:44:10 pm

Title: Who needs "hot" injection?
Post by: dillenger1 on April 05, 2009, 06:44:10 pm

Im selling my 10mm hybrid pump.runs real strong.Peugoet hybrid with volkswagen core.Make an offer


altitude pump is good never ran it,but has new seals .all is well inside.make offer Has governor mod done(http://i249.photobucket.com/albums/gg206/2253benjamin/powder008.jpg)the hybrid

(http://i249.photobucket.com/albums/gg206/2253benjamin/volkswagendiesel015-2.jpg) the fuel pin on the alt comp pump

Title: Who needs "hot" injection?
Post by: dillenger1 on April 08, 2009, 05:33:58 pm

bump.Nobody needs a good injection pump?The altitude pump has the governor mod done

Title: Who needs "hot" injection?
Post by: truckinwagen on April 08, 2009, 05:38:25 pm

what kind of price range you looking at getting?

what shaft does it have?
is it just an altitude comp, or has it been converted to run boost enrichment?

Title: Who needs "hot" injection?
Post by: dillenger1 on April 09, 2009, 03:05:49 am

Its been converted to run off boost.It needs a stiffer spring in the aneroid though.Ill take 125.00 for the altitude pump and 175.00 for the 10mm

Title: Who needs "hot" injection?
Post by: Rabbit on Roids on April 09, 2009, 01:38:00 pm

you built this pump right? how well did it fuel your engine? what injectors is it set up to run best with?

Title: Who needs "hot" injection?
Post by: dillenger1 on April 10, 2009, 03:20:04 am

Yep i put it together.It fueled my engine quite well .I was running gtd nozzles

Title: Who needs "hot" injection?
Post by: Rabbit on Roids on April 10, 2009, 09:25:21 am

would it run good with a set of fresh TD 155bar injectors? or is there something better about the GTD nozzles?

Title: Who needs "hot" injection?
Post by: dillenger1 on April 10, 2009, 04:27:18 pm

Sure.I dont think the gtd nozzles actually flow more fuel though.So any factory nozzle would work.I have the injectors to brand new nozzles just poptested and adjusted to 160 bar.

Title: Who needs "hot" injection?
Post by: dillenger1 on April 18, 2009, 02:52:06 pm

who needs a pump or two?

Title: Who needs "hot" injection?
Post by: ryanp on May 03, 2009, 01:42:09 am

dillenger1 - just a quick question, I've got a new peugeot pump coming my way, would this fit directly onto an AAZ without building it into a VW casing?

Cheers

Title: Who needs "hot" injection?
Post by: dieselherb1 on May 08, 2009, 04:09:46 am

Bump
Price now?

Title: Who needs "hot" injection?
Post by: myke_w on May 08, 2009, 07:54:41 am

was this built to run an MTDI?

Title: Who needs "hot" injection?
Post by: Rabbit on Roids on May 08, 2009, 10:22:50 am

no, he built it to run on his 1.6 in his toyota.. think he told me he had it set up with 160 bar injectors or something..

Title: Re: Who needs "hot" injection?
Post by: myke_w on May 26, 2009, 01:40:05 pm

Does the 10mm have the lda?