VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: ELVIS on March 21, 2009, 12:55:54 pm
-
Bought one off fleabay - £22.50 with all pipes including delivery!
I think i know where it mounts but just want to confirm it.Under the battery tray area there are three holes on a vertical plate coming down from the chassis leg. The three holes have elongated slots on them at the 6 o clock position.
I am guessing this is where the IC mounting bracket goes ?
However , the mounting bracket only lines up with 2 of them.Is this because the tdi body is slightly different ?
In my mind it is the only place it will fit, ideas/pics ?
-
hi, i fitted a tdi intercooler onto my mk3 golf td using the bracket. you may want to remove the two/three plastic gromets that hold the arch liner for ease of access.
-
Cheers chap! Did you find on the vertical mounting face of the bracket the two top bolts (one in each top corner of the bracket ) mounted ok , the third which is lower and sited in from the side didnt appear to line up.Is this standard ? Is the TDi + Td body slightly different ?
-
from what i can remember, the bracket fitted fine, two bolts at top one at bottom. mines an aaz on a 96plate and i didnt have no issues. i did have custom pipe work done as the original pipes didnt really work out too well.
-
see this post for some pics of my motor:
http://vwdiesel.net/phpBB/viewtopic.php?t=17861&highlight=intercooler