VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => TDI Engine -General Info => Topic started by: elroberl on March 01, 2009, 09:54:38 am

Title: How to make 2.0 TDI in 1.9 TDI-PD 8v ARL?
Post by: elroberl on March 01, 2009, 09:54:38 am

Hello.

I have 1,9 tdi-PD 150 cv 8V.

I want to make this motor 2,0 tdi.

That pistons I need…81 or 82 mm?
I need to change the connecting rods and the crankshaft ?

I need to mechanize cylinder block ?

Thanks.

Title: Re: How to make 2.0 TDI in 1.9 TDI-PD 8v ARL?
Post by: jtanguay on March 01, 2009, 11:35:45 am

Quote from: "elroberl"

Hello.

I have 1,9 tdi-PD 150 cv 8V.

I want to make this motor 2,0 tdi.

That pistons I need…81 or 82 mm?
I need to change the connecting rods and the crankshaft ?

I need to mechanize cylinder block ?

Thanks.

apparently vw's idea of a 2.0TDI is actually something like 1.955L or something  :lol: which isn't too much of an upgrade, but still decent.

AFAIK you should be able to use the larger pistons with just boring out the block.  i need to install my etka again to xref the part numbers.  you'll definitely need to tune the ECU to get it performing the way it should with the extra volume though.

Title: Re: How to make 2.0 TDI in 1.9 TDI-PD 8v ARL?
Post by: elroberl on March 01, 2009, 12:02:02 pm

Quote from: "jtanguay"

Quote from: "elroberl"

Hello.

I have 1,9 tdi-PD 150 cv 8V.

I want to make this motor 2,0 tdi.

That pistons I need…81 or 82 mm?
I need to change the connecting rods and the crankshaft ?

I need to mechanize cylinder block ?

Thanks.

apparently vw's idea of a 2.0TDI is actually something like 1.955L or something  :lol: which isn't too much of an upgrade, but still decent.

AFAIK you should be able to use the larger pistons with just boring out the block.  i need to install my etka again to xref the part numbers.  you'll definitely need to tune the ECU to get it performing the way it should with the extra volume though.

Thanks.