VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: jbturgeon on February 24, 2009, 04:22:21 pm

Title: 1,9 aaz cylinder head
Post by: jbturgeon on February 24, 2009, 04:22:21 pm

Hi everybody, i am desperatly looking for a 1,9td cylinder head (used). Anyone can help me!

Thx very much

Title: 1,9 aaz cylinder head
Post by: jtanguay on February 24, 2009, 04:24:55 pm

where are you located?

Title: 1,9 aaz cylinder head
Post by: burn_your_money on February 24, 2009, 06:15:04 pm

If you are desperate and local I have one you can have for free. It's rough but should be useable

Title: 1,9 aaz cylinder head
Post by: jbturgeon on February 24, 2009, 06:22:02 pm

i am in whistler British-columbia.. It is 50$ for a greyhound shipping. Otherwise, my girlfriend could pick it up, she is in toronto. Is it functionning or it will be a nightmare? Valves are ok?

Title: 1,9 aaz cylinder head
Post by: burn_your_money on February 24, 2009, 06:59:12 pm

Valves look ok. The head has severe pitting in at least 2 of the cylinder areas. It doesn't look like it will effect the sealing area though. The cam and related pieces are still installed in the head. VC is not.

Title: 1,9 aaz cylinder head
Post by: syncroserge on February 24, 2009, 08:12:21 pm

I have a good useable one with minimal cracks between valves and I am
closer to you so shipping shouldn't be too bad.

PM me if interested.

Title: 1,9 aaz cylinder head
Post by: jbturgeon on February 24, 2009, 09:02:13 pm

How much do you sell it for.. If you think it can still go for km's. I have to go back to quebec from BC. If you have some pics, That'll be really appreciated.

my hotmail is: [email protected]

Thx

Title: 1,9 aaz cylinder head
Post by: jtanguay on February 24, 2009, 09:45:39 pm

Quote from: "jbturgeon"

How much do you sell it for.. If you think it can still go for km's. I have to go back to quebec from BC. If you have some pics, That'll be really appreciated.

my hotmail is: [email protected]

Thx

i think the distance is probably unlimited given the nature of these motors.  but that is with proper installation.  a proper install of a head would be to have it checked for straightness, and pressure tested.  even with bad valve guides/seals, the motor will still run, but consume oil, and possibly lower compression a little.  but if you don't get it checked for straightness and or pressure tested, your taking a chance.  even if slightly off, the head gasket can blow...

that being said, i would trust Tyler's word on what he'd be giving you.

Title: 1,9 aaz cylinder head
Post by: burn_your_money on February 25, 2009, 04:29:59 am

Quote from: "jtanguay"

that being said, i would trust Tyler's word on what he'd be giving you.

I wouldn't. I'd ask for pictures. Every sale should include at least 1 picture. Especially questionable stuff

Title: 1,9 aaz cylinder head
Post by: CdnVWJunkie on February 25, 2009, 04:44:05 am

Good call Tyler.  Due diligence for any buyer.

Title: 1,9 aaz cylinder head
Post by: jbturgeon on February 27, 2009, 10:55:15 am

thx tyler for your honestly, i pm you about the pick up... Just a question: why is that head not in the car anymore? Pics will be really appreciated.

Thx

Title: 1,9 aaz cylinder head
Post by: jtanguay on February 27, 2009, 11:36:35 am

Quote from: "burn_your_money"

Quote from: "jtanguay"

that being said, i would trust Tyler's word on what he'd be giving you.

I wouldn't. I'd ask for pictures. Every sale should include at least 1 picture. Especially questionable stuff

true but for free you can't expect much  :wink:  :lol:

Title: 1,9 aaz cylinder head
Post by: burn_your_money on February 28, 2009, 07:09:08 am

I bought the injectors and this head was attached to them. The guy I bought it off of bought it off a guy who was going to put it on his 1.6 NA but gave up.