VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => TDI Engine -General Info => Topic started by: sabatino on February 21, 2009, 11:03:48 am
-
hi to everybody, 'I have a transmission of the vw golf3 td 1992 75 cvs the code written on the bell of the change it is CHD 27102
and under 1 14 would like to know if possible
what the relationships of the various marches and that are of the relationship to the final bridge
thanks to everybody.
-
http://www.zelek.com/diagram_charts/diagramlist.htm
CHD,DFP,ATH 3.45 1.94 1.28 0.91 0.75 3.67 From '93 1.9L TD 75hp
-
:D thanks Giulianot,il site is complete, I have to replace the change because very short.
do you have suggestions for change conic couple or do I compare final?
my change is chd final relationship 3.67 too much tall of turns
other suggestions? a regard
-
:D thanks Giulianot,il site is complete, I have to replace the change because very short.
do you have suggestions for change conic couple or do I compare final?
my change is chd final relationship 3.67 too much tall of turns
other suggestions? a regard
look for a CTN. it is a stronger transmission, and the gearing is quite tall. in fact, it seems to have the tallest ring & pinion gear of all the 02A/02J's
R&P 1st 2nd 3rd 4th 5th
3.157 3.778 2.118 1.360 1.029 0.755
approximately 56.8mph (91.4km/h) @ 2000 rpm with 14" tires. just by upgrading your tires to 16" you could go 100km/h @ 2000 rpm.
-
:D thanks for the risposte,mas wanting to change that is only the final relationship the conic couple 3.67 with one more' long thing would change to the other marcie?os it suits me to change only the relationship of the scene 5° marcia?datemis you recommend my change it is too much short it reaches 162 km\hs in 5° to 3900 rpms and me from' 90 cvs to 71 km\hs
help help help :( :( :( :( :(