VWDiesel.net The IDI, TDI, and mTDI source.

General Information => Troubleshooting => Topic started by: LoneWolf on February 08, 2009, 04:10:00 pm

Title: AAZ boost pipe querie
Post by: LoneWolf on February 08, 2009, 04:10:00 pm

Hi all,

  ive got an AAZ lump with standard turbo in my mk2 gtd, but im having pipework troubles still. the outlet of the turbo is 1.5", whereas my pipework to the inter cooler is 2", can someone please post a couple of photos of how theyve solved this conundrum?  

 also what do you guys use to hold your pipes on with? ive tried jubilee clips, but the pipes STILL keep blowing off   :?


 cheers,
              Matt

Title: AAZ boost pipe querie
Post by: truckinwagen on February 08, 2009, 04:40:15 pm

you can buy transition joiners for pretty cheap(try siliconeintakes.com)

and I use t-bolt clamps, the ones with nuts on them so you can get a wrench on them and get them really tight.

-Owen

Title: AAZ boost pipe querie
Post by: LoneWolf on February 09, 2009, 12:32:12 am

Quote from: "libbybapa"

I always bead the pipe ends and use the above mentioned clamps.  That's good for at least 30 psi.

Check eBay for couplers and reducers.  

Andrew

 how do you do this?

Title: AAZ boost pipe querie
Post by: jtanguay on February 09, 2009, 08:09:14 am

the pipe beading should be put in the FAQ  :)