VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: SMOKEYDUB on July 31, 2005, 07:54:12 am

Title: what car can i get a 10mm head and plunger from?
Post by: SMOKEYDUB on July 31, 2005, 07:54:12 am

There are lots of scrap yards around here so im wondering where can i get a 10mm head and plunger? Is the factory 1.9 td pump a 10 mm? Anyways thanks for any help.

Title: what car can i get a 10mm head and plunger from?
Post by: Blades on July 31, 2005, 02:15:09 pm

Ford Ranger Diesel
1.6 and 1.9 IDI are 9mm

Title: what car can i get a 10mm head and plunger from?
Post by: fspGTD on August 01, 2005, 09:00:48 am

I got a 10mm VE pump (http://www.hostboard.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=4037&t=411) from a Mid 80's Mitsubishi Pickup Truck turbo-diesel.

Also, Another peugeot pump link. (http://www.hostboard.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=4037&t=5)

Title: what car can i get a 10mm head and plunger from?
Post by: Audi80 on August 01, 2005, 11:42:19 am

I have 10mm plunger from Toyota pump.

Title: 10mm pump
Post by: fatmobile on August 01, 2005, 11:56:46 pm

I've got one that came off an Audi 4000 NA diesel ... not sure if it was an automatic..
 Were the NA 1.6 automatics equiped with a 10mm pump?

Title: what car can i get a 10mm head and plunger from?
Post by: Caddy-Daddy on August 03, 2005, 03:56:49 am

Some 1.9 IDI are even 8mm.

10mm can be found on VAG SDI,TDI, Fiat Croma Ddi,

Title: 10mm pump head
Post by: moosiah on August 06, 2005, 06:00:10 pm

2.3 turbo Poegeot  motor ..... swap guts to vw compatable  3 bolt case..(use old na pump ).. 10 mm head and free LDA too....... :D