VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: joe_gtd on January 22, 2009, 12:43:07 pm

Title: exhaust??????
Post by: joe_gtd on January 22, 2009, 12:43:07 pm

hello again guys, getting quite good at this posting bussiness lol
im after fabbing up a straight through exhaust system or my gtd, and was wonderig how i would do it? for want off a better word1

i cant quite get my head round how you would start the 2.5 inch pipe???
ideas on a postcard lol
cheers guys.

Title: exhaust??????
Post by: regcheeseman on January 22, 2009, 01:41:58 pm

Cut the flange off the original, grind it out and weld from there - that's how I did my first one.

you'll need a 180 bend and a 90  bend and a bit of straight.........that's if it's going in a a1 chassis.

Title: exhaust??????
Post by: ein bora on January 22, 2009, 01:59:38 pm

Quote from: "regcheeseman"

Cut the flange off the original, grind it out and weld from there - that's how I did my first one.

you'll need a 180 bend and a 90  bend and a bit of straight.........that's if it's going in a a1 chassis.

How about for a mk3 - anybody know whats all needed??

Title: exhaust??????
Post by: DYNOMAX on January 23, 2009, 07:31:19 pm

I have made a small run with flanges to VW Diesel 1.6TD 1.9TD

Parts to run dual turbo will also be available.
World wide shipping no problemas.

//Anton

(http://i289.photobucket.com/albums/ll222/Savarturbo/P1000009.jpg)

Title: exhaust??????
Post by: 8v-of-fury on January 28, 2009, 07:22:21 pm

Quote from: "regcheeseman"

you'll need a 180 bend

Hehe, a 180 degree bend? thats a straight line! lol just thought i point that out.. lmao

Title: exhaust??????
Post by: Smokey Eddy on January 28, 2009, 08:52:56 pm

oh sweet jesus new turbo's are sexy

Title: exhaust??????
Post by: Dirtrag2 on January 29, 2009, 06:58:28 am

Quote from: "ein bora"

How about for a mk3 - anybody know whats all needed??

same as before but add a flex  :wink:

Title: exhaust??????
Post by: Vincent Waldon on January 29, 2009, 09:09:47 am

Here's a good example of a fab, including thoughts on where to get the parts:

http://vwdiesel.net/phpBB/viewtopic.php?t=14003&postdays=0&postorder=asc&start=0&sid=a05b000bffbff6aa91fdd0a5b21d2cbd

Title: exhaust??????
Post by: arb on January 29, 2009, 12:25:15 pm

Quote from: "Vincent Waldon"

Here's a good example of a fab, including thoughts on where to get the parts:

http://vwdiesel.net/phpBB/viewtopic.php?t=14003&postdays=0&postorder=asc&start=0&sid=a05b000bffbff6aa91fdd0a5b21d2cbd

Yes, a work of art !  I used a 4" table belt sander to make my flange flat when I welded it to the S.S. 90 degree.

Title: exhaust??????
Post by: dillenger1 on January 29, 2009, 03:20:02 pm

Quote from: "Smokey Eddy"

oh sweet jesus new turbo's are sexy

AAAAAAHHHHmen!

Title: exhaust??????
Post by: gigaz2 on January 29, 2009, 05:06:39 pm

Quote from: "DYNOMAX"

I have made a small run with flanges to VW Diesel 1.6TD 1.9TD

Parts to run dual turbo will also be available.
World wide shipping no problemas.

//Anton

how much for a piece or two to Portugal?