VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Baixo on January 20, 2009, 06:24:44 am

Title: show me pics of your k24/t3 on the 1.9
Post by: Baixo on January 20, 2009, 06:24:44 am

im asking cause i am wondering what was done for the oil feed line?

any pics for referance would be greatly apreciated...

Matt

Title: show me pics of your k24/t3 on the 1.9
Post by: g-spec on January 20, 2009, 09:48:25 am

My oil feed line didnt require any modification....it just bolted up to the new turbo. I have a t3 on a AAZ. Its the oil return line that does not fit. I have a custom stainless one 3/4inch ID from the turbo to the pan. Stock location is blocked.

Title: show me pics of your k24/t3 on the 1.9
Post by: jtanguay on January 20, 2009, 10:52:09 am

you can take the AAZ return line and weld it to the K24/T3 line.  you just need the banjo piece for the AAZ, and most of the return from the K24/T3.  alternatively, you might be able to use a 1.6TD pan and return it that way (with the 1.6TD return line), but i think it might be off by half an inch due to the 1.9 block being taller.

Title: show me pics of your k24/t3 on the 1.9
Post by: bert on January 20, 2009, 11:47:07 am

heres mine
AAZ with T3


(http://i78.photobucket.com/albums/j95/citigolf_2006/Image002-2.jpg)

Bert

Title: show me pics of your k24/t3 on the 1.9
Post by: Baixo on January 20, 2009, 12:30:19 pm

Quote from: "g-spec"

My oil feed line didnt require any modification....it just bolted up to the new turbo. I have a t3 on a AAZ. Its the oil return line that does not fit. I have a custom stainless one 3/4inch ID from the turbo to the pan. Stock location is blocked.

i gtd that im going to be swaping in a na 1.9 and using all the gtd stuff on that.

i was told about the oil feed line...i figured that i would have to do something there.

i was also told that the 1.6 oil filter housing is not transferable to the 1.9...

did you guys use the k24/t3 oil feed line on the 1.9 oil filter housing?

Title: show me pics of your k24/t3 on the 1.9
Post by: stewardc on January 21, 2009, 05:06:20 am

A hose making shop made me a nice new stainless braided feedline for about $30. I had just used a slightly bent 1.6 steel line before that.

Title: show me pics of your k24/t3 on the 1.9
Post by: jtanguay on January 21, 2009, 07:43:29 pm

Quote from: "Baixo"

Quote from: "g-spec"

My oil feed line didnt require any modification....it just bolted up to the new turbo. I have a t3 on a AAZ. Its the oil return line that does not fit. I have a custom stainless one 3/4inch ID from the turbo to the pan. Stock location is blocked.

i gtd that im going to be swaping in a na 1.9 and using all the gtd stuff on that.

i was told about the oil feed line...i figured that i would have to do something there.

i was also told that the 1.6 oil filter housing is not transferable to the 1.9...

did you guys use the k24/t3 oil feed line on the 1.9 oil filter housing?

you nee the K24/T3 oil line fitting from the 1.6 housing.  thread that into the 1.9 filter housing.  the line feed line will fit.