VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: handedyourhat on January 03, 2009, 10:37:27 pm
-
Would anyone be interested in purchasing one of these performance intake manifolds to make your 1.6 or 1.9 breath a whole lot better than the stock restrictive manifold. This manifold is the new dual plenem design and will keep the airflow in the intake even to all 4 cylinders instead of consentrating the air on the center cylinders on the poorly designed stock intake ... proly be lookin at $500 canadian and I would need your manifold to work with,I can make this intake for a 1.6L TD as well. This manifold is also listed on Ebay if you need better pics... [im(http://i454.photobucket.com/albums/qq267/handedyourhat/cars/DSCN0274.jpg)g][/img][/url][im(http://i454.photobucket.com/albums/qq267/handedyourhat/cars/DSCN0273.jpg)g][/img][im(http://i454.photobucket.com/albums/qq267/handedyourhat/cars/DSCN0279.jpg)g][/img][im(http://i454.photobucket.com/albums/qq267/handedyourhat/cars/DSCN0275.jpg)g][/img][im(http://i454.photobucket.com/albums/qq267/handedyourhat/cars/DSCN0276.jpg)g][/img] 8) 8) 8)
-
wish you had some bigger pics....
looks like a nice piece 8)
-
That's pretty fancy :D
I wonder if there would be room for a larger plenum. :?
-
Psssst, Dan, when you upload on photobucket there is a pane you open underneath "choose files to upload" and set it to 1mb.
Pm me if you have troubles.
-
Looks great but we need bigger pics!!!
-
Where on Ebay?
Do ya have a link?
Thanks..
-
I would love to...but I am already about 1,000 US dollars over budgett :cry: , so no way am I going to dump another 500 into it if it isn't 100% nessesary. If you could help me out and tell me how to make it dual plane I would have no problem building my own though. Or if you just feel sorry for a poor fellow and want to help me out in some way I am not above that :lol:
PS looks good from what I can see
-
ok, nobody else bid on this! It's mine! :P
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=120358633154&ih=002&sspagename=STRK%3AMEWA%3AIT&viewitem=
-
that is for sure a great looking and well built intake...for me since I have the tools to build my own I would have to say no I would not pay $500 for the intake...but somebody with no tools or time to built one would..
good luck with your project! 8)
-
at .99 US plus shipping I could afford it! you might have some competition spencebm :lol:
Don't worry though if it goes much more than that it is yours. Yes I am that cheap...I drive VWs don't I?
-
the reserve must be about $499 and no buy it now so we can all fight over it and bid it up to a thousand!!! F&%$ this, anyone wanna lend me a TIG welder?
-
at .99 US plus shipping I could afford it! you might have some competition spencebm :lol:
Don't worry though if it goes much more than that it is yours. Yes I am that cheap...I drive VWs don't I?
Does it fit a 1.6 N/A? Then ya might have a little fight..... :)
-
at .99 US plus shipping I could afford it! you might have some competition spencebm :lol:
Don't worry though if it goes much more than that it is yours. Yes I am that cheap...I drive VWs don't I?
Does it fit a 1.6 N/A? Then ya might have a little fight..... :)
it has D-shaped ports. it will fit the 1.6 n/a, but you might want to do some slight porting just so its not creating a lot of turbulence if you want to use this manifold.
is this one of Dave's? (935racer) with the ceramic coating inside+out ???
-
at .99 US plus shipping I could afford it! you might have some competition spencebm :lol:
Don't worry though if it goes much more than that it is yours. Yes I am that cheap...I drive VWs don't I?
Does it fit a 1.6 N/A? Then ya might have a little fight..... :)
it has D-shaped ports. it will fit the 1.6 n/a, but you might want to do some slight porting just so its not creating a lot of turbulence if you want to use this manifold.
is this one of Dave's? (935racer) with the ceramic coating inside+out ???
No, that manifold isn't coated, and I would never sell something with such horrible welding. Its a rip off of my intake manifolds, flattering :lol:
-
By the way handedyourhat, were you the fellow that asked to come down to my shop recently to see how I made these?
-
By the way handedyourhat, were you the fellow that asked to come down to my shop recently to see how I made these?
so Dave you're really not going to make more of these? i would have thought that the TDI guys would be all over these...
-
I think he is but it's too much fuss to individually ship and take "orders"
He wants to make a pile of em, sell them to a dealer like a VW import shop... or something similar.
-
Hey, I dont mean to step on anybody's toe's but I tried purchasing one of these intakes for my ride and they could not be purchased, so I decided to build my own for my 1.9 and I did....and I gave myself a pat on the back.....ever watch the movie "THE EDGE" with Anthony Hopkins and Mr Baldwin anyway in the movie a phrase that gets repeated over and over in one part of the movie is "What one man can do another can do" thats me I really beleive this.........I dont have the Word "no" or "Impossible" in my vocabulary.
D