VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: theman53 on December 21, 2008, 05:03:59 pm

Title: WTB: Oil lines send and return for KKK K24 Turbo on a 1.6L
Post by: theman53 on December 21, 2008, 05:03:59 pm
That's about it. I need to have the send and return oil lines for my turbo. I could probably make them if you guys give me the information needed, but if not let me know what price I need to pay. Thanks Lucas><>
Title: WTB: Oil lines send and return for KKK K24 Turbo on a 1.6L
Post by: Jettagli16v on December 22, 2008, 03:36:30 pm
same as T3 turbo?

if so, they cannot be bought. (that I could find!)
Just go to the dealership, and plunk down $200-230 for both, like I just did...

Or go custom, and fabricate something.
Plenty of Oil feed/return kits out there,
but if you look at the return line, most generic stuff will not fit.
Feed should be easy.

-Brad
Title: WTB: Oil lines send and return for KKK K24 Turbo on a 1.6L
Post by: Jettagli16v on December 22, 2008, 03:38:07 pm
P.S.
If you want to make them,
I can send you my old ones (again, T3) to copy,

But you have to promise to maintain them available for sale on this site, so I can buy them in 10 years when my new ones get tired!

-Brad
Title: WTB: Oil lines send and return for KKK K24 Turbo on a 1.6L
Post by: rallydiesel on December 22, 2008, 03:59:31 pm
prothe http://www.dieselvw.com/ has the return line for $20. You'll have to get the feed used or buy some generic stuff. Here's a good site for turbo accessories: http://www.atpturbo.com/.
Title: WTB: Oil lines send and return for KKK K24 Turbo on a 1.6L
Post by: 53 willys on December 22, 2008, 07:16:52 pm
Quote from: "rallydiesel"
prothe http://www.dieselvw.com/ has the return line for $20. You'll have to get the feed used or buy some generic stuff. Here's a good site for turbo accessories: http://www.atpturbo.com/.

that $20 return line from Prothe has be "out of stock" for months now!! dont hold your breath....
Title: WTB: Oil lines send and return for KKK K24 Turbo on a 1.6L
Post by: rallydiesel on December 22, 2008, 07:24:04 pm
I emailed him a while back and he had them in stock. I ordered it and got it soon after. I would suggest contacting him.
Title: WTB: Oil lines send and return for KKK K24 Turbo on a 1.6L
Post by: 53 willys on December 22, 2008, 07:31:01 pm
Quote from: "rallydiesel"
I emailed him a while back and he had them in stock. I ordered it and got it soon after. I would suggest contacting him.

cool thats good info...altho to late for me this info could help other guys looking for oil lines...I ended up making my own..but if I could have bought a new return for $20 I would have done it in a hart beat!!
Title: WTB: Oil lines send and return for KKK K24 Turbo on a 1.6L
Post by: theman53 on December 22, 2008, 07:32:42 pm
SA--WEET! I have been looking at the p-p-p-prothe one and his stuff after getting the pump scares me, but I liked the look of that piece I might contact him. The only information I got locally is a friend of mine who is into 5.9 cummins and he said make sure your drain is the next size bigger ID than the inlet. Makes sense.
Jettagli16v PM me if you are needing rid of a sender  :wink:
Title: WTB: Oil lines send and return for KKK K24 Turbo on a 1.6L
Post by: Jettagli16v on December 23, 2008, 02:39:38 pm
Quote
Jettagli16v PM me if you are needing rid of a sender


I did not quite understand that.

Also,
Just my .02,
Prothe did me dirty on some turbo gaskets,
and I am afraid to invest any more than $20 at a time.
Not to get off topic...

-Brad
Title: WTB: Oil lines send and return for KKK K24 Turbo on a 1.6L
Post by: theman53 on December 23, 2008, 03:59:52 pm
If you need rid of a sender

I meant if you have the oil lines especially the pressure sending one pm me and let me know how much for it I might want it.
Title: WTB: Oil lines send and return for KKK K24 Turbo on a 1.6L
Post by: theman53 on December 26, 2008, 06:02:10 am
I ust bought the return line I will be using a steel braid set up.
Anybody have a sending line? Or at least some measurements? I have plenty of time I think I could make some out of hard line.