VWDiesel.net The IDI, TDI, and mTDI source.

General Information => General => Topic started by: greatpenguin on December 20, 2008, 11:38:54 am

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: greatpenguin on December 20, 2008, 11:38:54 am

Just like it states, I cant find pics of it anywhere anymore.  Need pics of the 1.6l td intake manifold that they use to sell.  If you have one and could take pics that would be great!

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: cyrus #1 on December 20, 2008, 02:26:54 pm

It is a sexy piece!  I'm going to build one something like it for my project.

http://www.vwdiesel.net/phpBB/viewtopic.php?t=7676&highlight=

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: greatpenguin on December 20, 2008, 04:10:23 pm

I am going to try to have someone make one for me, thats the reason for the pics.

The internals on these, is everything completely hollow until it hits the runners on the stock intake?  If thats so, this doesn't seem to hard for someone to make.

If someone has one that can take a pic of the inside it would be great!

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: cyrus #1 on December 20, 2008, 04:22:41 pm

If I remember correctly, there was nothing fancy about the inside.  It wasn't dual plenum and there were no baffles or anything.

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: subsonic on December 20, 2008, 04:44:48 pm

I remember it saying dual plenum.  I remember asking if that could be explained.

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: 935racer on December 21, 2008, 12:51:14 pm

There is a calculated narrow slot that divides the two plenums, no internal baffles. Definitely two plenums, but not quite as simple as just putting the two together, took a while to figure out how to get the best air distribution across the ports under pressure.

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: greatpenguin on December 21, 2008, 05:15:21 pm

Quote from: "935racer"

There is a calculated narrow slot that divides the two plenums, no internal baffles. Definitely two plenums, but not quite as simple as just putting the two together, took a while to figure out how to get the best air distribution across the ports under pressure.

Anyway you would like to show up pics, or better explain as to what you did.  Since you are no longer making these for us you wouldn't be losing money, and it would be helping the community...   :D  :D  :D

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: 53 willys on December 22, 2008, 08:56:09 am

Quote from: "greatpenguin"

Quote from: "935racer"

There is a calculated narrow slot that divides the two plenums, no internal baffles. Definitely two plenums, but not quite as simple as just putting the two together, took a while to figure out how to get the best air distribution across the ports under pressure.

Anyway you would like to show up pics, or better explain as to what you did.  Since you are no longer making these for us you wouldn't be losing money, and it would be helping the community...   :D  :D  :D

yeah!!!!!  that would be SWEET!!!!
I would not ask if you where still making them...but if you have quit please do share any pics or info you got...thanks 8)

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: greatpenguin on January 02, 2009, 07:28:44 pm

:(

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: RabbitJockey on January 03, 2009, 10:32:13 am

i like my sdi intake

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: 53 willys on January 03, 2009, 08:25:07 pm

Quote from: "Trev0rbr"

i like my sdi intake

whats a SDI??

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: cyrus #1 on January 03, 2009, 10:21:05 pm

Unless I'm mistaken, I believe an SDI is a naturally aspirated direct injection engine.  I have no idea what the intake looks like though.  Can you post some pics?

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: jtanguay on January 03, 2009, 11:56:28 pm

Quote from: "cyrus #1"

Unless I'm mistaken, I believe an SDI is a naturally aspirated direct injection engine.  I have no idea what the intake looks like though.  Can you post some pics?

suction diesel injection.  pretty much a fancy way of saying naturally aspirated diesel engine (as it should be implied that all diesel engines are injection)

the n/a manifold has some long, equal length runners.  it does pose some mounting issues as it gets in the way of the turbo...

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: Smokey Eddy on January 04, 2009, 02:05:37 am

handedyourhat is selling these right now for 500 cdn (well similar)

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: 935racer on January 04, 2009, 11:59:35 am

I am actually still making these, just need to find a canadian or american distributor. The problem is I don't have time to take so many orders and individual shipping, so I need to find a retailer to buy 5 at a time or more.

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: BioDieselVW on January 04, 2009, 06:04:12 pm

How about a group buy 935? If we had 5 people on the site to commit would you make a batch? Im interested!

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: VW_Commuter on January 05, 2009, 01:48:20 pm

Quote from: "935racer"

I am actually still making these, just need to find a canadian or american distributor. The problem is I don't have time to take so many orders and individual shipping, so I need to find a retailer to buy 5 at a time or more.

Dave, if we got 5 or more people in on a group buy what would be the cost of the intake?

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: 935racer on January 05, 2009, 02:21:03 pm

Sure I would do a group buy of five. Cores would need to be provided, they would be ceramic coated inside and out as well as port matched. Price TBA

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: jtanguay on January 05, 2009, 02:21:21 pm

Quote from: "Smokey Eddy"

handedyourhat is selling these right now for 500 cdn (well similar)

but for $625 you can get it ceramic coated  8)

AND the baller passenger performance logo - extra 20hp/40 ft/lbs  :lol:

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: VW_Commuter on January 05, 2009, 02:22:57 pm

Hmmmm, thoughts of where to find a spare 1.6 TD intake manifold and the cash start swimming through my brain..............

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: 935racer on January 05, 2009, 02:29:10 pm

Quote from: "jtanguay"

but for $625 you can get it ceramic coated  8)

AND the baller passenger performance logo - extra 20hp/40 ft/lbs  :lol:

Dyno proven!!! :lol:

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: cyrus #1 on January 09, 2009, 10:26:29 pm

Quote from: "935racer"

Sure I would do a group buy of five. Cores would need to be provided, they would be ceramic coated inside and out as well as port matched. Price TBA

Would you be interested in doing the same sort of deal with your performance cams?  :twisted:

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: fdnyguy on January 30, 2009, 11:09:32 am

Quote from: "935racer"

Quote from: "jtanguay"

but for $625 you can get it ceramic coated  8)

AND the baller passenger performance logo - extra 20hp/40 ft/lbs  :lol:

Dyno proven!!! :lol:

Dave, any dyno's with a 1.6 N/A?

Title: Looking for pictures of the Passenger Performance 1.6 intake
Post by: dillenger1 on January 30, 2009, 03:53:55 pm

i may be in.