VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: trent77 on November 23, 2008, 03:26:04 pm

Title: water connection at cylinder head on aaz, anyone have 1?
Post by: trent77 on November 23, 2008, 03:26:04 pm

Looking for the housing that holds the coolant temp sender on my aaz. Not sure if they are all the same or not. Mine has 2 mounting holes going into the cylinder head, and a spot for the coolant sender to slide in and clip. It is made of plastic. If you have a good one that you want to sell send me a message and cost. Thanks

Trent

Title: water connection at cylinder head on aaz, anyone have 1?
Post by: trent77 on November 23, 2008, 03:27:08 pm

also, is there a gasket, or just the o-ring? It seems to me that both would be redundant, but I just want to make sure.

Title: water connection at cylinder head on aaz, anyone have 1?
Post by: blkboostedtruck on November 23, 2008, 03:44:23 pm

i got one from my AAZ transplant!
it has just a "O" ring
let me know if you want it?
it has the censers too!
Duane

Title: water connection at cylinder head on aaz, anyone have 1?
Post by: starrd on November 23, 2008, 06:52:49 pm

They are cheap to buy new.  Is this the one?
http://catalog.eautopartscatalog.com/archsoftware/europartsetc-us/quote.jsp?partner=europartsetc&year=1993&product=G2023-128793&application=000577622&partnerSession=76c70bc35c53b470ac63a0766bfb4fde


Note:If this is the wrong one then look for it on this site

Title: water connection at cylinder head on aaz, anyone have 1?
Post by: blkboostedtruck on November 23, 2008, 07:21:28 pm

Quote from: "starrd"

They are cheap to buy new.  Is this the one?
http://catalog.eautopartscatalog.com/archsoftware/europartsetc-us/quote.jsp?partner=europartsetc&year=1993&product=G2023-128793&application=000577622&partnerSession=76c70bc35c53b470ac63a0766bfb4fde

i'm sure thats the wrong one? thats for the end of the head!
i'm pretty sure trent wants the one on the front of the head that has the censers?
Duane

P.S. i'll trade for older metal style that have 2 censer ports?

Title: water connection at cylinder head on aaz, anyone have 1?
Post by: Dr. Diesel on November 24, 2008, 02:00:31 am

do yourself a favour and get a new one. Used ones very rarely seal, even with a new o-ring. They tend to warp, and corrode. (yes, even plastic corrodes. :? )
Giles can get you a good price on one.