VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: jackbombay on July 07, 2005, 10:30:59 pm

Title: Timing a non-turbo 2.4 (VW engine ina Volvo)
Post by: jackbombay on July 07, 2005, 10:30:59 pm

I was wanting to know what the correct lift at TDC for this engine (84') .

  I have a manual for the Audi 5 cylinder Diesels and for the non-turbo it says .80-.90 mm, I assume this is very close if not correct for the Volvo 2.4. My gauge is not metric and I will be shooting for the advanced end of the spectrum, .035".  I assume that finding TDC on this motor is similar to the Audi 5 banger that I have, a notch missing from the bell housing on the drivers side that lines up with the mark on the flywheel, can anyone confirm this?

Title: Timing a non-turbo 2.4 (VW engine ina Volvo)
Post by: jackbombay on July 09, 2005, 08:10:56 pm

Anyone?

Title: Timing a non-turbo 2.4 (VW engine ina Volvo)
Post by: vwmike on July 10, 2005, 01:54:49 am

I wish I could help, but I have no idea what ths epecs are for that engine.