VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: monomer on November 11, 2008, 08:54:47 pm
-
For a 1.6td build (turbo bottom end, 8v turbo log mani - 38mm wastegate)
(http://i23.photobucket.com/albums/b383/Monomer001x/tcw.jpg)
-
none of the turbo guys are gonna chime in?
-
The pressure ratio is not particularly high, above 3 is what you should be looking for.
Is the X scale cubic meters? Do you have a higher res image of the map?
If you can confirm what the X scale is I can plot a few points on the map for you.
-
thats a screendump from a pdf
anyone know where to host a pdf?
Volumetric Flow m3/min is labeled on the bottom
-
I can host it for you
email it to
[email protected]
-
sent
-
click for TURBO PDF (http://smellslikefries.com/turbo/tcw44.pdf)
and here is a slightly better screenshot of it
(http://smellslikefries.com/turbo/tcw44%20turbo.jpg)
-
(http://www.rbracing-rsr.com/turbo/TurboMaps/t3-50.gif)
any better?
-
^ANYONE?
-
Drop jackbombay a PM. He's pretty good with maps.
-
Id run it.
Should have plenty of range for your motor.
-
Id run it.
Should have plenty of range for your motor.
$300 NEW...
-
i've ran one but on a gasser! it is a quick spooling turbo!
but i don't think the turbo's last very long? when i got my truck it had one on it! and it also had 3 trashed core's with it for parts! and even the one that was on it took a dump! so i redone the manifold so it would fit a K26 and i never had a problem since!
Duane
-
i've ran one but on a gasser! it is a quick spooling turbo!
but i don't think the turbo's last very long? when i got my truck it had one on it! and it also had 3 trashed core's with it for parts! and even the one that was on it took a dump! so i redone the manifold so it would fit a K26 and i never had a problem since!
Duane
hmmmmm, my other garrett has lasted 400k miles
sounds like you have problems...
-
sounds like you have problems...
That goes without saying! :lol: :lol: :lol:
-
i've ran one but on a gasser! it is a quick spooling turbo!
but i don't think the turbo's last very long? when i got my truck it had one on it! and it also had 3 trashed core's with it for parts! and even the one that was on it took a dump! so i redone the manifold so it would fit a K26 and i never had a problem since!
Duane
hmmmmm, my other garrett has lasted 400k miles
sounds like you have problems...
it's not a daily driver!
i push it to it's limits to run low 11 sec in a 1/4 mile!
so yea i have do have problems! it did not give me 9sec.
Duane
(http://images.thesamba.com/vw/classifieds/pix/medium/2146178.jpg)