VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: ObscuredByClouds on September 26, 2008, 08:01:53 pm

Title: SOLDSOLDSOLD
Post by: ObscuredByClouds on September 26, 2008, 08:01:53 pm

SOLD

Title: Headgasket, Bolts, etc! Help.
Post by: Riverfurm on September 27, 2008, 03:45:46 am

Contact Raceware Hardware they will tell you what size stud and what to tork them to.

Title: Headgasket, Bolts, etc! Help.
Post by: subsonic on September 27, 2008, 05:49:44 am

For studs you have two options, raceware and arp.  Both are good.  Matter of choice.  11mm or 12mm is based off your current bolt size on your head/ block.  If you live in Canada you should be able to get the AAZ hg no problem,  you can get them in the US but it takes a bit more effort.  Myke_w here on the forum sells them.  Sizes / thickness is the same as long as it's hydo.  Add your location to your profile, it helps local members help you out.