VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: Spulen81 on September 07, 2008, 06:49:13 am

Title: FS: 1Z Pistons and Rods
Post by: Spulen81 on September 07, 2008, 06:49:13 am

These came from a 1Z I tore down and rebuilt.  I used some ALH pistons I had instead.  There is nothing wrong with these.  The parts were just wiped off and have not been really cleaned yet.


Pistons: $150 shipped

Will trade for a good TDI 02A or O2J starter.


(http://forum.vwsport.com/pics/data/500/medium/tdi_104.JPG)
(http://forum.vwsport.com/pics/data/500/tdi_100.JPG)

Title: FS: 1Z Pistons and Rods
Post by: Spulen81 on January 28, 2009, 06:11:44 am

Still have these, price dropped.

Title: FS: 1Z Pistons and Rods
Post by: fatmobile on January 31, 2009, 02:39:07 am

I broke an oil ring on one of the 1.7 pistons I got.
http://www.vwdiesel.net/phpBB/viewtopic.php?t=18115
 Hard enough finding pistons for a 1.7TD, not sure where to even look for rings.
 
 I'm wondering if the TDI/AZZ oil rings will fit, first oversize is the same diameter.
 What would it take for you to break a piece of oil ring off and send it in an envelope?

Title: FS: 1Z Pistons and Rods
Post by: Spulen81 on February 01, 2009, 01:29:27 pm

I can do that.  I assume anybody that would buy my pistons would be re placing the rings anyways.  Shoot me a PM with your address and I'll mail you one at no charge.   :D

Title: FS: 1Z Pistons and Rods
Post by: fatmobile on February 02, 2009, 02:08:45 am

Yeah, I didn't figure they would be used again,..
 for anything but scrap.

 What year did the 1Z come out of?

Thanks, I hope the cross section matches.
 What diameter are the pistons?

Title: FS: 1Z Pistons and Rods
Post by: Spulen81 on February 02, 2009, 05:23:16 am

Its a later 1Z, it had 7mm valve stems.  I don't know the year specifically. The pistons are 79.5mm.

Title: FS: 1Z Pistons and Rods
Post by: Spulen81 on April 01, 2009, 06:34:18 am

These are up on ebay now.  No reserve.