VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: Yellowfox on September 06, 2008, 05:32:22 am
-
Hello about 1 month ago I had to replace te the cylinder head, intakes valves, and piston rings becouse mines was cracked but now after 110km/h I fell that my engines now vibrates a lot, someone with the same problem???
Some Information obout he engine:
car: Golf mk3 GTD AAZ 1.9
-intakes valves new
-new piston rings
-original vw cylinder head
-some problems with IP or injectors (some problems at low rpms some little fails I will take it to someones who nows) could this be the problem??
Thanks and sorry for my englis Im agentinian
:oops:
-
you should sort the injectors. new nozzles are almost always in order (if you haven't done that yet)
-
Yeah start with the injectors. Make sure to have them calibrated with the new nozzles
-
now when you say vibrate... explain. does the car shimmy? does it 'cut out' is it only when you go 110? 100 is fine?
-
Thanks all of you, and jtanguay i fell that after 110 the engine is too noisy (a lot of tac,tac,tac on low rpms and noisy in higth I thinks this is related with te injectors, but the vibration too??) and y fell some little vibration, wheels are ok, balanced about 1 moth ago and tires had run only 10000kmt
Thanks again for the tips an De-Code my english :D
Greetings
-
Yes injectors are in order sir ;)
They will cause your car to shake at idle and anything under 2000 rpm most times.
It may surprise you something so simple will make such a difference..
-
thanks 4 new ones will be the next step :D
greetings