VWDiesel.net The IDI, TDI, and mTDI source.
For Sale/Looking For => Parts for Sale/Wanted => Topic started by: houseofdiesel on September 04, 2008, 04:07:59 pm
-
So I have come to realize there are too many parts kicking around...
B3/B4 Passat AAZ
-transmission $200 02A cable shift
-flywheel/clutch $50
-a/c compressor $25
-all brackets $10-100 each
-injection pump (DOES NOT have the aneroid boost enrichement, it is there but no way to hook up a line no fitting, all CDN Passats were like this) $150
-p/s pump $40
-injectors $60 set of four
-rebuilt cyl head 1.9 AAZ td (never installed) $500
-1.9 AAZ td block with crank, rods/pistons, intermediate shaft etc has new rings and rod bearings $400
-used AAZ 1.9 block with crank/rods/pistons/intermediate shaft $300
-manifolds with egr function
MK3 Golf and Jetta
-1.9 AAZ block with fixed crank gear (machinist good job) complete with crank/pistons etc $400
-1.9 AAZ crankshaft, polished, tdi crank gear fix $250
-all brackets, valve covers, timing belt covers upper/lower/inside/outside
-clutch and flywheels for 020 trans
-front crossmembers for rad
-subframes for engines
-steering racks, a.c. compressors, manifolds,
I have multiples of pretty much everything, I just cleaned out a friends garage of Vanagon parts need some more space. I will reply however I am busy each night after work putting up more shelves etc to keep it all inside.
Greg
-
Greg how much for the front engine mount braket and bolts?
-
Front engine mount bracket $10 with bolts.
Greg
-
have the IP pump cable assembly for this car (pedal to pump). I'm in need for the b3 mTDI conversion. Thought I had one lined up but haven't heard in a while. Were there any special cruise considerations for the b3 AAZ passats related to the pump? switches, etc? I'd be interested in them as well as the brackets that hold them. If you'd part.
Joe
-
just curious, but how much for all engine parts and related accessories? no need for A2/3 parts that don't bolt in to A1, or powersteering.
I can pick up so no need for shipping quotes. thanks.
-
B3 Passat air intake to turbo hose for a K14?
-
I should have the air intake hose, it would really help if you could read the part number off yours though since mine are together on a shelf
I am not sure about the throttle cable from the B3, I think it went onto a conversion car already (gas to diesel). I have to double check what is still on one of the motors tonight
tSoG-84bit just list what you are looking for/need and I will quote you a price, I will try to get some pics up soon to give everyone an idea of how much I have accumulated...
Greg
-
I'm interested in blocks, heads and their internals; injection pumps, lines, and injectors; manifolds, turbos. as much as will fit in a pickup truck. Pictures, and a full list/price of what you have would be appreciated, thanks.
-
You have PM
-
pm'ed on the head
-
Still have 4 for $60? I'll take 'em.
-
don't have a AAZ camshaft in good shape do you?
Joe
-
Still have 4 for $60? I'll take 'em.
Arrg!!
I meant to write:
Do you still have 4 AAZ injectors for $60?
I'll take 'em if you do!
-
Is your inbox full? Trying to send you PMs but they're not going through.
-
do you have these items from an AAZ engine?
(http://members.shaw.ca/dcstarr/images/Passat/Breather/Breather.GIF)
If so, let me know how much
Thanks
-
Ok, I have a couple of individual AAZ dual spring injectors left for Mercedes 5 cyl folks $15 each
I have organized the shelves much better, plenty of air boxes, timing belt covers for 1.9, air intake hoses, downpipes, block breathers, valve covers, cluthes/flywheels 020 and 02A, too many parts!
I do have a AAZ camshaft used
Greg
-
Greg, you still have the head and an intake?
-
Do you have the glow plug relay socket?
-
Do you have the glow plug relay socket?
In case you're retrofitting a glow plug system you might need to know that the AAZ relay and socket are *very* different from the 1.5/1.6 style glow plug relay and socket.
-
hmm yeah Im needing to add a relay socket into my vanagon that was gas.
-
Cool... just didn't want you to spring for the wrong stuff.
So much VW stuff is the same Lego blocks between years... the glow plug system unfortunately switched in 1994 with the AAZ engine. (1992 on some Canadian Passats) :wink:
-
Well I have an 95 aaz motor. So it may be what im looking for if he has it. Sorry to sidetrack the thread.
-
Do you have a TD exhaust manifold for AAZ with trapezoid flange for turbo?
-
I still have a couple of heads, one used $300 shipped one rebuilt $500 shipped
Intakes manifolds for sure $30 plus shipping
I do have exhaust manifold with trapziod for k14 turbo $30 plus shipping
I don't have the wiring organized yet to know what is there and what is not...it will be a bit before I get to that stuff (huge pile of wiring sitting inside). Glow plug wiring is pretty simple you should be able to make a harness, if your stuck for a relay holder and fuse holder that I can find quickly enough
Greg
-
Heads are sold, still many parts though...
-
Greg,
I need a set of AAZ pistons and connecting rods!!!!!!!
If you can help me out on this great and or
let me know of where I can get some - please!!!!!!
AAZ Pump, injectors, lines and mounting bracket!!!
Thanks
Steve
-
Hey Greg,
thanks for finally sending my exhaust manifold. I'm only sorry you waited a week after I paid you to actually ship it!
-
Hi Charlie, I did apoligize for being slow to send it, we did have a long weekend up here and it was sent 3 business days after I emailed you. I have caught up with everyone here.
Greg
-
Hey greg,
I need an AAZ dipstick, have one to spare? Call the shop if you don't mind
Thanks.
Tyler
-
Greg,
Interested in the 02A trans-axle!
PM sent
Steve