VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: the caveman on August 27, 2008, 09:45:18 am

Title: what size pump head ?
Post by: the caveman on August 27, 2008, 09:45:18 am

I need to find out what size pump.head would be on a 1.9 l NA diesel. i hope you guys in europe can help.

Title: what size pump head ?
Post by: Powered by Spearco on August 27, 2008, 01:26:53 pm

I've seen on 1.9 na's 8mm and 9mm heads. Don't know if that stock or what.
Josh

Title: what size pump head ?
Post by: snakemaster on August 27, 2008, 03:35:35 pm

the two that i have striped were 9mm 1.9 na  done the gov mod and turned up the fuel and it would pass a stock 1.6 td  :lol:

Title: what size pump head ?
Post by: the caveman on August 27, 2008, 04:35:18 pm

well i just installed a 10 mm . I had bought an 11mm ,but my guy believes it also needed a TDI  [ or similar ]camplate to work. As i am pressed for time i had to settle for the 10mm. But the fact that they came with a 9 mm then i should be good to go. Mine did come with an 8mm  head and other governor bits to keep the fueling limited.

Title: what size pump head ?
Post by: jimfoo on August 27, 2008, 06:27:31 pm

You don't want a TDI cam plate in an IDI motor.