VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: RandoM on August 25, 2008, 09:48:10 am

Title: DIY for changing the IP on a 1.9td ??
Post by: RandoM on August 25, 2008, 09:48:10 am

Thats about it... I searched the board but didn't find any... anyone knows of one ?

Ca peut être en francais aussi ca ne me dérange pas...

Title: DIY for changing the IP on a 1.9td ??
Post by: burn_your_money on August 25, 2008, 10:04:36 am

so you have a AAZ pump and you want to put in a different AAZ pump on the car?

Title: DIY for changing the IP on a 1.9td ??
Post by: RandoM on August 25, 2008, 10:08:29 am

exactly... I'm not concerned about taking the other off and putting the new on ...

My concern is more about re-timing it and making sure it starts again...

sorry if it looks dimb... Im very new to diesel

Title: DIY for changing the IP on a 1.9td ??
Post by: saurkraut on August 25, 2008, 01:25:28 pm

You need all of this stuff:

(http://i45.photobucket.com/albums/f91/choppercat205/IMG_0273.jpg)

Look at this post for sources:

Diesel Timing Tool (http://www.vwdiesel.net/phpBB/viewtopic.php?t=15515)

Buy a Bently manual.

You have to pull the timing belt, which means the engine need to be retimed.

Its almost impossible to do with out those tools.

If you can't /  won't buy the tools and manual, take it to some one who has the right tools and have them do it for you so you don't screw it up.

Title: DIY for changing the IP on a 1.9td ??
Post by: burn_your_money on August 25, 2008, 05:16:22 pm

Depending on whay style of pump you have you may be able to get away with all the above tools. If you have a 2 piece pump pulley you don't need any special timing tools because the pump comes pre-timed.

I won't bother writing up the proceedure unless you actually have the 2 piece pulley. Are you sure both of your AAZ pumps use the same pulley (either 1 or 2 piece)

Title: DIY for changing the IP on a 1.9td ??
Post by: Vincent Waldon on August 25, 2008, 05:56:14 pm

Here's one way to do the procedure if you have a one-piece pulley:

http://vincewaldon.com/index.php?option=com_content&task=view&id=24&Itemid=28