VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: Familydiesel on August 20, 2008, 04:46:53 pm

Title: WTB K24 turbo, or = for 1.6 td, ex. manifold rect. flanged
Post by: Familydiesel on August 20, 2008, 04:46:53 pm

I want to buy a good K14 or K24 turbo, or a turbo that has a trapezoid shaped exhaust inlet flange.  I have the square (8cm X 8cm) exhast flanged down pipe and want to get a turbo that will bolt up to this 85 Jetta 1.6 td engine setup.
Or
I Would consider a good T3 (retangular flanged) exhaust manifold that fits the 1.6td.
Thanks,

Greg

Title: WTB K24 turbo, or = for 1.6 td, ex. manifold rect. flanged
Post by: westyman on August 20, 2008, 10:53:51 pm

I have a K24 that had the wastegate actuator removed, valve blocked in the closed position, runs a nice 24 psi wide open on a TD. :-)
Had it on a TD Vanagon.

Title: K24 turbo
Post by: Familydiesel on August 22, 2008, 07:20:58 pm

Hey Westyman,
Check your pm.  
How much do you want for the turbo?  Is it tight without end play or does it need a rebuild?  
I have other questions, but I wrote them on a pm.
Thanks,
Greg

Title: BOUGHT A K14
Post by: Familydiesel on September 25, 2008, 05:13:29 pm

Hi,
I bought a K14 from blkboostedtruck.  
Thanks,

Greg

Title: WTB K24 turbo, or = for 1.6 td, ex. manifold rect. flanged
Post by: burn_your_money on September 25, 2008, 05:23:35 pm

for future reference, the VW diesel T3 uses the same flanges as the K14 and K24, amongst others