VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: bluemotion on July 28, 2008, 08:47:33 pm

Title: Removing and Installing Prechamber Inserts
Post by: bluemotion on July 28, 2008, 08:47:33 pm

What is the best way to remove and install the prechamber inserts on the 1.6 diesel heads?

Title: Removing and Installing Prechamber Inserts
Post by: zukgod1 on July 28, 2008, 09:19:56 pm

Hammer and a drift, put drift down through the injector hole and hit it. Line up and tap back in when done, peen around it and your done.

Title: Removing and Installing Prechamber Inserts
Post by: zukgod1 on July 28, 2008, 09:50:37 pm

Quote from: "libbybapa"

The best way is to leave them alone unless absolutely necessary.

Andrew

This is true, I was going to ask why you wanted to remove them.

The head can and should be machined with them in place.