VWDiesel.net The IDI, TDI, and mTDI source.

General Information => General => Topic started by: Dakotakid on July 04, 2008, 01:28:50 pm

Title: N/A air cleaner substitute Mk I on Mk II
Post by: Dakotakid on July 04, 2008, 01:28:50 pm

I will soon be putting a rebuild back into an '85. I hate the early Mk II air cleaners (those with a total of 6 clips). I want a later Mk II air box base and face (total of 4 clips), but don't have access to one in my area.

Question: will a Mk I n/a intake manifold and attached air box clear the back wall in the engine compartment in the Mk II?? As I look at the scenerio, it seems like the Mk II engine sits just a little farther rear-ward in the compartment. I am not sure the bend in the original Rabbit manifold will clear.

Otherwise, I may opt to use long stainless hose clamps. I'm not at all worried about the appearance. Just trying to give my new engine clean breathing!!!!

Title: N/A air cleaner substitute Mk I on Mk II
Post by: spencebm on July 04, 2008, 01:37:34 pm

gas intake and cone filter, easy and better than that air box and you can make a tube to suck cold air from somewhere away from the engine, i know a couple people that have done it easy!

Title: N/A air cleaner substitute Mk I on Mk II
Post by: burn_your_money on July 04, 2008, 03:02:56 pm

Or gasser intake with a TD air box, or gasser air box I suppose

As to the original question, I'm not sure, I've never tried.

Title: N/A air cleaner substitute Mk I on Mk II
Post by: Dakotakid on July 05, 2008, 12:19:14 pm

Bump, as I am trying to avoid unnecessary clutter.
I've got at least one gasser manifold that I could use like that.
Don't really want to do it. Part of the attraction of driving these is the bare-bones appeal. I like stuff simple and to the point.
Please don't get me wrong....of course, I am thankful for the responses.

Original question stands.

Title: N/A air cleaner substitute Mk I on Mk II
Post by: spencebm on July 05, 2008, 03:53:30 pm

everyone can agree with simplicity, i guess thats why i like the gasser setup but good luck with finding that plastic box

Title: N/A air cleaner substitute Mk I on Mk II
Post by: FWD.MOTION on July 06, 2008, 11:50:11 am

does anyone know what's wrong with putting the gasser mani and a cold air intake run to a cone filter? Would that be a upgrade in performance or?

Title: Re: N/A air cleaner substitute Mk I on Mk II
Post by: Quantum TD on July 06, 2008, 10:46:08 pm

I think I've got a spare MK2 air pickup assy (minus the goofy insulated tubing). PM me if interested. I know I have two, but I'm not sure if one is bad. I'd like to keep one for a spare, so if both are good, then  I'll sell the other.

Title: N/A air cleaner substitute Mk I on Mk II
Post by: FWD.MOTION on July 20, 2008, 07:53:11 am

im inside now taking a small break from grinding out in the shop!

Im working on putting my new made flange onto the gasser intake mani and I'll let everyone know what exactully the difference gains wise is on a 1.5diesel n/a

once im done Ill let everyone know what the difference is using the gasser intake mani without turbo... 8) ...for now! :twisted: