VWDiesel.net The IDI, TDI, and mTDI source.
For Sale/Looking For => Parts for Sale/Wanted => Topic started by: hamradio on July 03, 2008, 02:31:17 pm
-
I bought this a while back in unknown condition, stuck it on my car, started it up, and oil was pouring out of the turbine. I'm done with messing with it. Comes with a cut apart actuator. It did, however, spool up nicely. About 1mm of side to side play, seems like just a tad of end to end play (if I pull on or push the shaft hard). Also has a 1/4" npt drain fitting I welded up for it, and I might be talked into including a 4an oil feed adapter and some downpipe flanges I cut for it. The part number on it suggests it *may* be a vnt 17, I dunno. I could post up the numbers if needed.
Make an offer (I don't expect too much), or would trade/cash plus the vnt for a 1.6 TD manifold or manifold/turbo. Or a set of good injectors. Actually, I'd probably trade for a lot of things, I love trading stuff.
A couple pics, does not include that oil drain line, and as mentioned, the actuator can is cut apart.
(http://i210.photobucket.com/albums/bb280/kc0kbh/P1000557.jpg)
(http://i210.photobucket.com/albums/bb280/kc0kbh/P1000556.jpg)
Thanks,
Devan
-
Where are you located and could you post the part number?
-
I'm in minnesota, and the turbo is a GT1749V. I heard that's a VNT17, but I'm not totally sure. I could find the vw PN's on the mani and turbo, if needed.
-
I need to buy a VNT manifold, but does anyone know if a VNT 20 will bolt right up to this manifold?
Thanks,
Jeff B.
-
I don't know...I'd almost guess not, as the turbine is probably bigger on a vnt20...best bet is to ask around tdiclub.