VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: pheonix165 on June 28, 2008, 09:09:48 am
-
when resealing my pump i came across a torques bolt (one of the ones that run the length of the pump) that looks like it had been shaved down. the subsequent shaving didn't leave enough mettle for my socket to grab onto so i striped the head in the removal attempt.
does anyone have the part number for the bolt?
it runs from the side of the pump with the injector unions and the fuel return and each bolt runs the length of the pump...i think.
your help is appreciated
-
There shouldn't be anything special about it. I'd just go to the local hardware and get a similar size allen head bolt in a 10.9 or 12.9 grade.
-
didn't even think of that... :oops: