VWDiesel.net The IDI, TDI, and mTDI source.

General Information => Troubleshooting => Topic started by: dieselwagen on May 24, 2008, 02:11:57 pm

Title: brake/acceleration "clunk"
Post by: dieselwagen on May 24, 2008, 02:11:57 pm

this forum has help me deal with a few problems that i was having with my ride, awesome inputs, expert advise, there really ain't no replacement for experience. and i truly value everyones assistance.
thanks again guys.

problem is fixed.!!! thanks a lot everyone

i went with mk4/tt rear LCA bushing, and stock fronts
car now rides very tight, realize my car actually corners well for a diesel.

Title: brake/acceleration "clunk"
Post by: Darkness_is_spreading on May 24, 2008, 04:03:57 pm

how are your drive axles and further more boots on your axles...... Rotors warped badly, or maybe the slider bushings that allow for the brake pad wear.....

Title: brake/acceleration "clunk"
Post by: Op-Ivy on May 24, 2008, 08:06:26 pm

Sounds like a cv joint to me.

Title: brake/acceleration "clunk"
Post by: Patrick on May 25, 2008, 03:59:11 am

Could be control arm bushings or upper strut mounts too, but you'd likely feel that as squirrelly steering..........