VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: burn_your_money on May 10, 2008, 05:48:31 pm

Title: AAZ part out - round 2
Post by: burn_your_money on May 10, 2008, 05:48:31 pm
These are a new batch of parts I picked up today.

All these parts were pulled from a scrap yard. I don't know their condition or mileage.

1) AAZ head, complete with valves, cam and cam cover. No injectors. 2 of the plastic caps for the VC nuts are MIA $50

Might be warped, no straight edge. Has the normal cracks between the valves and also a crack at the precup. It was removed using the proper steps. All 4 precups are cracked. One of the precups falls out of the head. No damage to it's bore though. Also, all the pistons had deep mushrooming from valve contact. Strangly all the valves look to be ok visually (while still installed) I`m not sure if someone got lucky, the valves are bent or the belt broke and someone replaced/rebuilt the head.

2) K14 turbo. Excessive shaft play. $50 - SOLD

3) Exhaust manifold - K14, T3, K24 etc $60

4) AAZ intake manifold $60

5) AAZ vacuum pump with hose - $35
Title: K14 Turbo
Post by: Fisher on May 10, 2008, 06:03:16 pm
I'll take the Turbo if it's a K14.

Rudy
Title: AAZ part out - round 2
Post by: burn_your_money on May 10, 2008, 06:05:48 pm
Yes it is
Title: AAZ part out - round 2
Post by: KTZed on May 10, 2008, 07:29:04 pm
Do you have the crank breather hose vent thingy that the 1.6 doesnt have?
Title: AAZ part out - round 2
Post by: burn_your_money on May 11, 2008, 07:06:29 am
No I don't. I'm looking for one myself
Title: AAZ part out - round 2
Post by: burn_your_money on May 12, 2008, 07:05:20 pm
up
Title: intake and exhaust
Post by: CaddyWVO on May 12, 2008, 08:32:16 pm
I have a 1.9 TD AAZ that was installed in a normally aspirated configuration. Do you still have the exhaust and intake manifolds? If yes, I will take them.
Title: AAZ part out - round 2
Post by: jimfoo on May 12, 2008, 09:08:23 pm
Quote from: "KTZed"
Do you have the crank breather hose vent thingy that the 1.6 doesnt have?

Is that the hose that attaches to the lower block and goes up to the hockey puck? If so, I have one.
Title: AAZ part out - round 2
Post by: KTZed on May 12, 2008, 10:13:23 pm
Quote from: "jimfoo"
Quote from: "KTZed"
Do you have the crank breather hose vent thingy that the 1.6 doesnt have?

Is that the hose that attaches to the lower block and goes up to the hockey puck? If so, I have one.


Hmmm PM'd so as not to jack thread  :D
Title: AAZ part out - round 2
Post by: burn_your_money on May 13, 2008, 06:54:59 pm
IM sent.

 8)
Title: AAZ part out - round 2
Post by: burn_your_money on May 14, 2008, 05:47:49 pm
I just checked this head as best I can for warpage and it appears to be straight. I can't gaurantee it because I'm not cleaning it, which is required to get accurate readings.