VWDiesel.net The IDI, TDI, and mTDI source.

General Information => Troubleshooting => Topic started by: Diesel Fumes on January 23, 2008, 06:32:48 pm

Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: Diesel Fumes on January 23, 2008, 06:32:48 pm
I have a T3, if I want to put a K24 on, does that require a different manifold or downpipe or is it direct bolt up?
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: blkboostedtruck on January 23, 2008, 07:01:09 pm
Tyler (burn your money) i know has the answer for you!
Duane
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: burn_your_money on January 23, 2008, 07:15:12 pm
direct bolt on if they are both from a VW. The K14 is not a direct bolt on. It has a smaller air intake and boost pressure exit then the K24 and the T3 but it will bolt up to the manifold and the downpipe.
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: Diesel Fumes on January 23, 2008, 11:17:24 pm
Quote from: "burn_your_money"
direct bolt on if they are both from a VW. The K14 is not a direct bolt on. It has a smaller air intake and boost pressure exit then the K24 and the T3 but it will bolt up to the manifold and the downpipe.
Perfect.

Now time to dump 650 bucks on a new K24 :(  :D
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: subsonic on January 24, 2008, 05:25:42 am
Do not pay that much.  You can get one for way cheaper.
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: BioDieselVW on January 24, 2008, 06:50:29 am
Does anyone know the air intake diameter on a T3 as well as the boost pressure exit diameter? Im looking to do the swap also and want to get the correct size adaptors to plumb everything together :D
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: blkboostedtruck on January 24, 2008, 11:20:29 am
Quote from: "BioDieselVW"
Does anyone know the air intake diameter on a T3 as well as the boost pressure exit diameter? Im looking to do the swap also and want to get the correct size adaptors to plumb everything together :D


Tyler should be abel to tell you the diameter? i bought his T3 and K14 from him! but he still has them! i have a K24 laying around that i can measure for you if you need?
thanks Duane
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: burn_your_money on January 24, 2008, 12:52:29 pm
Quote from: "blkboostedtruck"

 i bought his T3 and K14 from him! but he still has them!


Sure make me sound like an ass :P

I'll measure them after work or tomorrow morning
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: BioDieselVW on January 24, 2008, 01:46:41 pm
Thanks Tyler Your the man !
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: Diesel Fumes on January 24, 2008, 03:04:08 pm
If someone has a new/remaned K24 to sell me for less than 625, then I am game for that.  PM me with details
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: BioDieselVW on January 27, 2008, 11:50:24 am
Anyone know the sizes of the T3 ?
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: subsonic on January 27, 2008, 02:24:44 pm
Are you looking for ID or OD?
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: burn_your_money on January 27, 2008, 07:47:25 pm
Quote from: "libbybapa"
The exit of the compressor is the same between the K14, K24 and T3.  It is only the compressor inlet and the oil return outlet that are different.  The pan fitting is the same.

Andrew


I stand corrected, right you are.

Does anyone want pictures?
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: BioDieselVW on January 28, 2008, 06:41:44 am
Whats the inlets outside diameter T3 ? Thanks
Title: For MKII turbo diesels, T3, K14, K24 - same manifolds/dp?
Post by: burn_your_money on January 28, 2008, 08:06:23 am
Quote from: "BioDieselVW"
Whats the inlets outside diameter T3 ? Thanks


2 5/16"