VWDiesel.net The IDI, TDI, and mTDI source.

General Information => General => Topic started by: Baselyne on January 07, 2008, 05:15:10 am

Title: Flipping Exhaust manifold? Let's see your new oil lines...
Post by: Baselyne on January 07, 2008, 05:15:10 am

If a person was planning on flipping their exhaust manifold to run a gasser intake mani then Im told a person would have to make custom oil lines...

Does anyone care to share what they have fab'd up in the way of using that gasser intake mani?

Title: Flipping Exhaust manifold? Let's see your new oil lines...
Post by: RabbitJockey on January 07, 2008, 02:56:13 pm

if ur going to do that why not get a better mani and a better turbo

Title: Flipping Exhaust manifold? Let's see your new oil lines...
Post by: hillfolk'r on February 09, 2008, 11:29:24 am

i use a early 4-2 manifold flipped over w/an adapter block to mate to a t3 flange
i was able to rebend the oil feed line,but made up a custom -10 an line for the drain
i cut off the stock drain tube before the rubber,and welded on a -10 fitting to screw the line onto
put a -10 bulkhead in the pan in stock td location
works great
(http://img529.imageshack.us/img529/3259/hpim0813ap0.jpg)