VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => TDI Engine -General Info => Topic started by: the caveman on December 30, 2007, 03:49:17 pm

Title: should i go through the trouble?
Post by: the caveman on December 30, 2007, 03:49:17 pm
my 1990 transporter has the KY 1.7 l diesel in it, basically a bored and stroked 1.6.  I was going to drop in an AHU or ALH , m-pump it, etc. I can get a long block cheap so it's not a matter of money but i don't have tons of time to play around with. I guess what i'm trying to say is, is it worth my time to change the whole block or should i just turbo, nozzle and intercooler my 1.7 or will there be a real big difference. I do know the tdi's are much more cleaner and efficient, but ...    I'm not looking for tons more power if for no other reason than the fact that my truck is as high as a syncro so handling is a bit of an issue; don't want to get in over my head!
Title: should i go through the trouble?
Post by: subsonic on December 30, 2007, 04:02:46 pm
There might be a few people on this forum with an interest in your 1.7.  Perhaps you  should pull it, sell or swap it for a AAZ or TDI.  I know Dave at PP has a interest in the 1.7.  

Get in touch with Andrew here on the forum.  He has a large clue bag on your type of ride and suitable mods.
Title: should i go through the trouble?
Post by: the caveman on December 30, 2007, 04:15:57 pm
Okay, Andrew who and Dave at where?.
Title: should i go through the trouble?
Post by: subsonic on December 30, 2007, 04:34:12 pm
Sorry,

Andrew = Libbybapa
Dave = 635Racer
Foxracer was also interested in the 1.7
I was too, but I am to far into my project to turn back now.

Other people have expressed interest in getting a 1.7 on here as well.
Perhaps you should post a feeler for a possible trade / sale in the for sale section.
Title: should i go through the trouble?
Post by: the caveman on January 03, 2008, 07:21:52 am
It's not my hobby, it's my life . All the time in the shop is spent on my customer's cars. Unfortunately, i'm not so rich [yet] that i can others to do all my work, and i don't have the energy anymore to stay in the shop till midnight dicking around.
Title: Re: should i go through the trouble?
Post by: hillfolk'r on February 10, 2008, 01:48:07 am
Quote from: "the caveman"
my 1990 transporter has the KY 1.7 l diesel in it, basically a bored and stroked 1.6.  I was going to drop in an AHU or ALH , m-pump it, etc. I can get a long block cheap so it's not a matter of money but i don't have tons of time to play around with. I guess what i'm trying to say is, is it worth my time to change the whole block or should i just turbo, nozzle and intercooler my 1.7 or will there be a real big difference. I do know the tdi's are much more cleaner and efficient, but ...    I'm not looking for tons more power if for no other reason than the fact that my truck is as high as a syncro so handling is a bit of an issue; don't want to get in over my head!







i saw that show extreme 4x4 on spike a few weeks ago,they put a 1.6 td (or maybe a 1.9 idi) in a samuri
cool swap,,why not try a mtdi though????
an m tdi runs great
Title: should i go through the trouble?
Post by: the caveman on February 10, 2008, 09:41:31 am
after lots of back and forth i will go the tdi route. i found an AHU for $300 without pump or turbo which is
fine since i now have a vanagon pump and 10mm head, quantum exhaust and someone i know thinks he has a turbo for me. it's all comeing together! of course i  now also have to look into changing my diff to match. anybody got a gas 5 speed to sell for parts?
Title: should i go through the trouble?
Post by: hillfolk'r on February 16, 2008, 12:56:40 pm
yea a 3.67 r+p is nice
but i ran a 7A for a long time,and that was geared "ok"